Pinecar Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool might be used with any gravity race automobile whose total
    maximum measurements are 7" long, 2-3/4" large, and need 3/8"
    clearance from track to floor on automobile body.
Perform seven checks:
    Inspect axle slots for positioning.
    Inspect clearance between wheel and automobile body.
    Avoid camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

This item praises the main item below.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique mix of micron size graphite particles developed to
    reduce the coefficient of friction and provide your automobile the winning
    edge.
High in carbon material, provide it exceptional lubricating characteristics.
Will not draw in dust and dirt.
Perfect dry lubricant for application on a lot of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

This item is regularly bought with the above mentioned item.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your automobile, the quicker it goes.
Incremental weights permit you to change you automobile's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the automobile and set up the weight.
Carded packaging with guidelines on rear.

INCLUDES:
One Set of 2oz Round Weights

NEEDS:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want one more fantastic item to enhance the above mentioned item?



These are Super Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed guidelines and handy hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are handy for building and displaying
    your automobile: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want one more fantastic item to enhance the above mentioned item?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack hobby glue that is fast-setting for instant hold, gap-filling
    to adhere uneven surface areas and impact-resistant because it does not
    end up being brittle.
Dries clear as glass.
Non-toxic, non-flammable and no harmful odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Formula Glue.

SPECS:
.5oz (15ml)

This item praises the above gone over item.

Basic Car Kit

Create Your very own Original Car Design with the Basic Block Kit from PineCar.

FEATURES:
Thoroughly selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood acts as the platform on which you will create
    and build your derby car.
Ideal for those who want to produce their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Solid Axles, 4 Wheels,
5 Wheel Retainers, 4 Axles (Nails), and Guidelines

NEEDS:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Weight(s)
Paint
COMMENTS:
The following products are handy for building and displaying your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Book
PINY1382--Racer Show Stand