Pinecar Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool may be utilized with any gravity race automobile whose overall
    optimum measurements are 7" long, 2-3/4" broad, and need 3/8"
    clearance from track to lowest point on automobile body.
Perform seven checks:
    Inspect axle slots for alignment.
    Inspect clearance between wheel and automobile body.
    Avoid camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This product compliments the main item here.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique blend of micron size graphite particles created to
    reduce the coefficient of friction and give your automobile the winning
    edge.
High in carbon material, give it exceptional lubricating characteristics.
Will not bring in dust and dirt.
Perfect dry lubricant for application on a lot of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

This product is often purchased with the above discussed product.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your automobile, the quicker it goes.
Incremental weights permit you to adjust you automobile's weight, even on
    race day.
Drill 3/8" (9.5mm) diameter hole in the automobile and install the weight.
Carded packaging with instructions on rear.

INCLUDES:
One Set of 2oz Round Weights

NEEDS:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want one more terrific product to enhance the above discussed product?



These are Very Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed instructions and useful hints.

INCLUDES:
(5) Axles

COMMENTS:
The following items are useful for building and displaying
    your automobile: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want one more terrific product to enhance the above discussed product?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack pastime glue that is fast-setting for instant hold, gap-filling
    to adhere uneven surface areas and impact-resistant because it does not
    end up being brittle.
Dries clear as glass.
Non-toxic, non-flammable and no harmful odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Formula Glue.

SPECS:
.5oz (15ml)

This product compliments the above gone over product.

Basic Car Kit

Develop Your Own Original Car Design with the Basic Block Kit from PineCar.

FEATURES:
Thoroughly picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will create
    and build your derby car.
Ideal for those who wish to develop their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, Two Strong Axles, Four Wheels,
Five Wheel Retainers, Four Axles (Nails), and Guidelines

NEEDS:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Weight(s)
Paint
COMMENTS:
The following items are useful for building and displaying your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Reserve
PINY1382--Racer Show Stand