Pinecar Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool may be used with any gravity race vehicle whose total
    optimum measurements are 7" long, 2-3/4" wide, and require 3/8"
    clearance from track to lowest point on vehicle body.
Perform 7 checks:
    Inspect axle slots for positioning.
    Inspect clearance in between wheel and vehicle body.
    Prevent camber.
    Inspect toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

This product praises the main item below.



This is a .25oz Tube of Graphite
from Pine-Pro Competition Components.

FEATURES:
An unique mix of micron size graphite particles formulated to
    reduce the coefficient of friction and provide your vehicle the winning
    edge.
High in carbon content, provide it exceptional lubricating characteristics.
Will not bring in dust and dirt.
Perfect dry lubricant for application on a lot of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

This product is regularly acquired with the above discussed product.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your vehicle, the much faster it goes.
Incremental weights permit you to adjust you vehicle's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the vehicle and set up the weight.
Carded packaging with guidelines on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want an additional great product to enhance the above discussed product?



These are Very Speed Axles from PINE-PRO Competition Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed guidelines and practical hints.

INCLUDES:
(5) Axles

REMARKS:
The following products are practical for structure and showing
    your vehicle: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

Want an additional great product to enhance the above discussed product?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack hobby glue that is fast-setting for instant hold, gap-filling
    to adhere irregular surfaces and impact-resistant because it does not
    become brittle.
Dries clear as glass.
Non-toxic, non-flammable and no hazardous odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Formula Glue.

SPECS:
.5oz (15ml)

This product praises the above talked about product.

Basic Car Kit

Create Your very own Original Automobile Design with the Basic Block Set from PineCar.

FEATURES:
Carefully selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood works as the platform on which you will create
    and construct your derby car.
Ideal for those who wish to develop their own distinct design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Solid Axles, 4 Wheels,
5 Wheel Retainers, 4 Axles (Nails), and Directions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Weight(s)
Paint
REMARKS:
The following products are practical for structure and showing your
    vehicle: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Reserve
PINY1382--Racer Display Stand