Pinecar Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool may be used with any gravity race vehicle whose general
    maximum measurements are 7" long, 2-3/4" wide, and need 3/8"
    clearance from track to lowest point on vehicle body.
Perform 7 checks:
    Check axle slots for positioning.
    Check clearance between wheel and vehicle body.
    Prevent camber.
    Check toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Positioning Tool

This thing compliments the main item below.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
A special mix of micron size graphite particles formulated to
    lower the coefficient of friction and offer your vehicle the winning
    edge.
High in carbon content, offer it superior lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

This thing is frequently purchased with the above mentioned thing.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The much heavier your vehicle, the quicker it goes.
Incremental weights allow you to adjust you vehicle's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the vehicle and install the weight.
Carded packaging with directions on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want another great thing to compliment the above mentioned thing?



These are Incredibly Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed directions and valuable hints.

INCLUDES:
(5) Axles

REMARKS:
The following products are valuable for building and showing
    your vehicle: Pro-Body Tool
Structure & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Display Stand (PINY1382)

Want another great thing to compliment the above mentioned thing?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack pastime glue that is fast-setting for instantaneous hold, gap-filling
    to adhere uneven surface areas and impact-resistant since it does not
    become brittle.
Dries clear as glass.
Non-toxic, non-flammable and no damaging odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Solution Glue.

SPECS:
.5oz (15ml)

This thing compliments the above talked about thing.

Basic Car Kit

Produce Your very own Original Vehicle Design with the Basic Block Kit from PineCar.

FEATURES:
Thoroughly selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will develop
    and construct your derby car.
Ideal for those who wish to create their own distinct design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, 2 Solid Axles, 4 Wheels,
Five Wheel Retainers, 4 Axles (Nails), and Directions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
REMARKS:
The following products are valuable for building and showing your
    vehicle: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Display Stand