MST RMX 2.5 S 1/10 RWD Electric Drift Car Kit (No Body)

MST RMX 2.5 S 1/10 RWD Drift Automobile Set

The MST RMX 2.5 RS 1/10 RWD Electric Drift Vehicle Set offers a host of features drift lovers desire. The transmission permits either RMX or RRX style motor mount choices. This offers the motorist the choice to select upper or lower center of mass positions as needed to fit the individuals requirements. Two servo mounting positions are used, with the choice of picking vertical or lateral servo mount positions to tune the weight bias. The servo mount positions bring with them 2 different battery mount choices enabling included weight adjustment. Integrate this with numerous choices for electronic devices positioning and you have an extremely tuneable chassis that can be setup in a variety of ways to fit various track conditions and driving styles.

In addition to the positioning of the elements, the RMX 2.5 S also includes enhanced HT rear lower arms, an adjustable steering system for two-step Ackermann changes, threaded plastic shock bodies, a high level of roll center adjustment and much more. These features all integrate to provide you an unbelievable chassis that can run the wall with the very best of the best.

NOTE: Finished kit shown in pictures is for illustrative purposes only. See needed to complete list listed below for a list of products needed to complete the model.

Functions:

Rear spur-gear-driving the transmission can be changed between RMX and RRX drive modes 

Two install methods of servo – vertical or lateral implementation

Plastic high rigidity building and constructions redesigned front guiding suspension system 6 degrees KPI steering upright, and - 0.5 hauling range axle style

Inside rod fulcrum mount at the front arm features 10-step height adjustment and both side positions

Boosted HT brief rear lower arms

The fulcrum at the rear suspension upper rod is 5-step adjustable on both sides. The external fulcrum is 4-step adjustable on both sides

Steel CVD axle of rear transmission system

Ideal for long and brief battery

Full metal ball connectors

Requirement realistic caliper and disc shape brake set

Requirement ball differential

Full turnbuckles

Requirements:

Wheelbase: 257mm

Width: 190mm

Drive Mode: RWD

Hex to Hex Width: F178mm / R171mm

Caster: adjustable  6 / 8 / 10 / 12 degree

Bearing: Full ball bearing

Damper: Hydraulic damper set

Required to Total:

Motor & ESC

2 Channel Radio System (minimum)

Steering Servo

Battery & Battery charger

Drift Body

Drift Gyro

Drift Wheels

Drift Tires

Polycarbonate Paint for Body