MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/Nissan R34 GT-R Body

MST RMX 2.5 1/10 2WD Brushless RTR Wander Car

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Car. Structure off of the success of the RMX 2.0 this upgraded variation brings the next level of efficiency to the RMX name. With many hours of research and development, MST has fine tuned the RMX platform for the ultimate drift experience. Created to be easy to drive for beginners but still rewarding for the skilled drifter, MST has consisted of an upgraded chassis. This enhanced chassis deals increased traction and control along with a variety of adjustments to tweak your driving experience. Whether you are a knowledgeable drifter or just beginning, the RMX 2.5 RTR offers you the efficiency you are trying to find with looks to match! This RMX 2.5 RTR includes the Nissan R34 GT-R pre-painted body.

NOTE:

With MST's commitment to quality they evaluate drive each lorry to guarantee correct operation. In many cases there might be slight marks on the tires and this is considered normal.

Wheels shown in images might not illustrate the wheels consisted of with the lorry. MST includes a random set of wheels.

Features:

Upgraded chassis adds enhanced rear traction and control

2 servo install alternatives – vertical or lateral

Upgraded spur equipment allows the transmission to be converted from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI guiding upright, and -0.5 towing range axle design

Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height modification and 2 side positions

Upgraded HT "Short" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step modification on both sides and the outer fulcrum is 4-step adjustable on both sides

2 motor mounting alternatives – High or Low center of gravity

Oil filled high efficiency shocks

Complete ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery mount accommodates both basic and "shorty" style battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed guiding servo 

MGX Steering Gyro

Realistic drift wheel and tire bundle

Specifications:

Size: 1/10 Drift Car

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive Mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper Hydraulic damper set

Includes:

RMX 2.5 RTR Wander Car

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Steering Gyro

Realistic Street Tires

Needed To Complete:

(1) Two LiPo or 6-Cell NiMH Battery Load w/T-Style Connector

(1) Suitable Battery Charger

(4) "AA" Batteries (for transmitter)