MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/LBMT Body (Grey)

This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this upgraded version brings the next level of performance to the RMX name. With countless hours of research and development, MST has tweaked the RMX platform for the ultimate drift experience. Designed to be easy to drive for novices however still rewarding for the knowledgeable drifter, MST has actually included an upgraded chassis. This improved chassis offers increased traction and control in addition to a myriad of adjustments to tweak your driving experience. Whether you are a knowledgeable drifter or simply beginning, the RMX 2.5 RTR provides you the performance you are searching for with wants to match! This RMX 2.5 RTR consists of the LBMT pre-painted body.


NOTE:

With MST's commitment to quality they evaluate drive each automobile to make sure correct operation. Sometimes there might be slight marks on the tires and this is thought about normal.

Wheels shown in photos might not portray the wheels included with the automobile. MST consists of a random set of wheels.

Features:

Updated chassis includes improved rear traction and control

2 servo set up choices – vertical or lateral

Updated spur equipment allows the gearbox to be transformed from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann changes

6 degree KPI guiding upright, and -0.5 hauling distance axle design

Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height change and two side positions

Updated HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step change on both sides and the outer fulcrum is 4-step adjustable on both sides

2 motor mounting choices – High or Low center of mass

Oil filled high performance shocks

Complete ball bearings throughout

Steel CVD axle transmission system

Reasonable caliper and disc shape brake set

Battery mount accommodates both basic and "shorty" design battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed guiding servo 

MGX Steering Gyro

Reasonable drift wheel and tire bundle

Requirements:

Size: 1/10 Drift Automobile

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.5 RTR Drift Car

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Needed To Total:

(1) 2S LiPo or 6-Cell NiMH Battery Load w/T-Style Connector

(1) Compatible Battery Charger

(4) "AA" Batteries (for transmitter)