MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/JZ3 (Black)

MST RMX 2.5 1/10 2WD Brushless RTR Drift Cars And Truck

This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Cars And Truck. Structure off of the success of the RMX 2.0 this updated version brings the next level of efficiency to the RMX name. With countless hours of research and advancement, MST has fine tuned the RMX platform for the ultimate drift experience. Developed to be simple to drive for beginners however still rewarding for the knowledgeable drifter, MST has actually consisted of an upgraded chassis. This improved chassis offers increased traction and control together with a myriad of changes to tweak your driving experience. Whether you are an experienced drifter or simply getting going, the RMX 2.5 RTR gives you the efficiency you are trying to find with seeks to match! This RMX 2.5 RTR includes the JZ3 pre-painted body.

NOTE:

With MST's commitment to quality they evaluate drive each car to ensure correct operation. In some cases there might be slight marks on the tires and this is considered normal.

Wheels shown in images might not depict the wheels consisted of with the car. MST includes a random set of wheels.

Features:

Upgraded chassis adds improved rear traction and control

2 servo set up choices – vertical or lateral

Upgraded spur equipment enables the transmission to be transformed from RMX to RRX setups

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI steering upright, and -0.5 pulling distance axle style

Upgraded inside rod fulcrum install at the front upper arm features a 10-step height modification and two side positions

Upgraded HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step modification on both sides and the outer fulcrum is 4-step adjustable on both sides

2 motor installing choices – High or Low center of mass

Oil filled high efficiency shocks

Full ball bearings throughout

Steel CVD axle transmission system

Sensible caliper and disc shape brake set

Battery install accommodates both standard and "shorty" style battery packs

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Sensible drift wheel and tire package

Specifications:

Size: 1/10 Drift Car

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive Mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper Hydraulic damper set

Consists of:

RMX 2.5 RTR Drift Cars And Truck

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Required To Total:

(1) Two LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector

(1) Suitable Battery Battery Charger

(4) "AA" Batteries (for transmitter)