MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/JZ3 (Black)

MST RMX 2.5 1/10 2WD Brushless RTR Wander Cars And Truck

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Cars And Truck. Structure off of the success of the RMX 2.0 this upgraded version brings the next level of efficiency to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the supreme drift experience. Developed to be easy to drive for novices however still rewarding for the skilled drifter, MST has included an updated chassis. This enhanced chassis deals increased traction and control in addition to a plethora of changes to fine tune your driving experience. Whether you are an experienced drifter or just getting started, the RMX 2.5 RTR gives you the efficiency you are trying to find with seeks to match! This RMX 2.5 RTR consists of the JZ3 pre-painted body.

NOTE:

With MST's dedication to quality they check drive each lorry to make sure proper operation. Sometimes there may be minor marks on the tires and this is thought about normal.

Wheels shown in images may not depict the wheels included with the lorry. MST consists of a random set of wheels.

Features:

Updated chassis includes improved rear traction and control

2 servo install alternatives – vertical or lateral

Updated spur equipment permits the gearbox to be converted from RMX to RRX setups

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI steering upright, and -0.5 pulling range axle style

Revamped inside rod fulcrum mount at the front upper arm includes a 10-step height change and two side positions

Updated HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod includes a 5-step change on both sides and the external fulcrum is 4-step adjustable on both sides

2 motor installing alternatives – High or Low center of mass

Oil filled high efficiency shocks

Complete ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery mount accommodates both basic and "shorty" design battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Realistic drift wheel and tire bundle

Specifications:

Size: 1/10 Drift Car

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive Mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Complete ball bearing transmission system

Damper Hydraulic damper set

Consists of:

RMX 2.5 RTR Wander Cars And Truck

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Needed To Complete:

(1) Two LiPo or 6-Cell NiMH Battery Pack w/T-Style Port

(1) Suitable Battery Charger

(4) "AA" Batteries (for transmitter)