Updated on May 10, 2024 11:28:43 AM
Highly Capable and Fully Upgradable Drift Car
This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this updated version brings the next level of performance to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the ultimate drift experience. Designed to be easy to drive for beginners but still rewarding for the experienced drifter, MST has included an updated chassis. This improved chassis offers increased traction and control along with a plethora of adjustments to fine tune your driving experience. Whether you are an experienced drifter or just getting started, the RMX 2.5 RTR gives you the performance you are looking for with looks to match! This RMX 2.5 RTR includes the 86RB clear body.
NOTE:
With MST's commitment to quality they test drive each vehicle to ensure proper operation. In some cases there may be slight marks on the tires and this is considered normal.
Wheels shown in photos may not depict the wheels included with the vehicle. MST includes a random set of wheels.
Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
Updated chassis adds improved rear traction and control
Two servo install options – vertical or lateral
Updated spur gear allows the gearbox to be converted from RMX to RRX configurations
Adjustable high angle steering system with adjustable Ackermann changes
6 degree KPI steering upright, and -0.5 towing distance axle design
Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height adjustment and two side positions
Updated HT "Short" rear lower arm
The fulcrum at the rear suspension upper rod features a 5-step adjustment on both sides and the outer fulcrum is 4-step adjustable on both sides
Two motor mounting options – High or Low center of gravity
Oil filled high performance shocks
Full ball bearings throughout
Steel CVD axle transmission system
Realistic caliper and disc shape brake set
Battery mount accommodates both standard and "shorty" style battery packs
Hobbywing XBL 2500Kv brushless motor
Hobbywing XBL50 brushless ESC
MST SC-0352 high speed steering servo
MGX Steering Gyro
Realistic drift wheel and tire package
Specifications:
Scale: 1/10
Length: -
Width: 190mm
Height:
Wheelbase: 257mm
Drive: RWD
Power Source: Electric
Input Voltage: 2S (7.2-7.6V) LiPo
Assembly Level: Ready-To-Run
Includes:
(1) RMX 2.5 1/10 2WD Brushless RTR Drift Car w/GR86RB Body
Needed to Complete:
(1) 2S LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector
(1) Compatible Battery Charger
(4) "AA" Batteries (for transmitter)
- MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/GR86RB Body (Nitrous
