MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/E92 Body (Grey)

This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Cars And Truck. Building off of the success of the RMX 2.0 this updated variation brings the next level of efficiency to the RMX name. With numerous hours of research study and advancement, MST has fine tuned the RMX platform for the supreme drift experience. Developed to be simple to drive for newbies however still rewarding for the knowledgeable drifter, MST has included an upgraded chassis. This improved chassis offers increased traction and control in addition to a huge selection of modifications to tweak your driving experience. Whether you are an experienced drifter or simply starting, the RMX 2.5 RTR provides you the efficiency you are looking for with seeks to match! This RMX 2.5 RTR consists of the E92 pre-painted body.


NOTE:

With MST's dedication to quality they check drive each vehicle to ensure proper operation. Sometimes there may be slight marks on the tires and this is considered normal.

Wheels shown in images may not illustrate the wheels included with the vehicle. MST consists of a random set of wheels.

Features:

Updated chassis adds enhanced rear traction and control

Two servo install alternatives – vertical or lateral

Updated spur gear enables the gearbox to be transformed from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann changes

6 degree KPI steering upright, and -0.5 hauling distance axle style

Upgraded inside rod fulcrum mount at the front upper arm features a 10-step height change and 2 side positions

Updated HT "Short" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step change on both sides and the outer fulcrum is 4-step adjustable on both sides

Two motor mounting alternatives – High or Low center of gravity

Oil filled high efficiency shocks

Full ball bearings throughout

Steel CVD axle transmission system

Reasonable caliper and disc shape brake set

Battery mount accommodates both basic and "shorty" design battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Reasonable drift wheel and tire package

Requirements:

Size: 1/10 Drift Automobile

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.5 RTR Drift Cars And Truck

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Required To Complete:

(1) TWO LiPo or 6-Cell NiMH Battery Load w/T-Style Port

(1) Suitable Battery Charger

(4) "AA" Batteries (for transmitter)