MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/E30RB Body (Grey)

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Vehicle. Building off of the success of the RMX 2.0 this updated variation brings the next level of performance to the RMX name. With countless hours of research study and development, MST has tweaked the RMX platform for the ultimate drift experience. Created to be simple to drive for novices but still rewarding for the experienced drifter, MST has included an upgraded chassis. This enhanced chassis deals increased traction and control along with a variety of modifications to fine tune your driving experience. Whether you are a skilled drifter or just starting, the RMX 2.5 RTR offers you the performance you are looking for with seeks to match! This RMX 2.5 RTR consists of the E30RB pre-painted body.


NOTE:

With MST's commitment to quality they check drive each vehicle to ensure correct operation. In some cases there might be small marks on the tires and this is considered normal.

Wheels shown in images might not illustrate the wheels included with the vehicle. MST consists of a random set of wheels.

Features:

Upgraded chassis includes enhanced rear traction and control

Two servo set up alternatives – vertical or lateral

Upgraded spur equipment permits the gearbox to be converted from RMX to RRX configurations

Adjustable high angle steering system with adjustable Ackermann modifications

6 degree KPI guiding upright, and -0.5 hauling range axle design

Upgraded inside rod fulcrum mount at the front arm features a 10-step height change and 2 side positions

Upgraded HT "Brief" rear lower arm

The fulcrum at the rear suspension upper rod features a 5-step change on both sides and the outer fulcrum is 4-step adjustable on both sides

Two motor installing alternatives – High or Low center of gravity

Oil filled high performance shocks

Full ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery mount accommodates both standard and "shorty" style battery packs

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed guiding servo 

MGX Steering Gyro

Realistic drift wheel and tire bundle

Requirements:

Size: 1/10 Drift Cars and truck

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper: Hydraulic damper set

Includes:

RMX 2.5 RTR Wander Vehicle

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Needed To Total:

(1) TWO LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector

(1) Compatible Battery Battery Charger

(4) "AA" Batteries (for transmitter)