MST RMX 2.5 1/10 2WD Brushless RTR Drift Car w/A90RB Body (Metal Gre

This is the MST RMX 2.5 1/10 2WD Brushless RTR Wander Vehicle. Building off of the success of the RMX 2.0 this updated version brings the next level of performance to the RMX name. With countless hours of research study and advancement, MST has fine tuned the RMX platform for the supreme drift experience. Created to be easy to drive for beginners but still rewarding for the experienced drifter, MST has actually consisted of an updated chassis. This improved chassis deals increased traction and control together with a plethora of adjustments to tweak your driving experience. Whether you are a skilled drifter or just starting, the RMX 2.5 RTR gives you the performance you are searching for with seeks to match! This RMX 2.5 RTR includes the A90RB pre-painted body.


NOTE:

With MST's commitment to quality they evaluate drive each vehicle to ensure appropriate operation. In many cases there might be slight marks on the tires and this is thought about normal.

Wheels displayed in photos might not depict the wheels consisted of with the vehicle. MST includes a random set of wheels.

Features:

Updated chassis includes improved rear traction and control

2 servo install choices – vertical or lateral

Updated spur equipment allows the gearbox to be converted from RMX to RRX setups

Adjustable high angle steering system with adjustable Ackermann changes

6 degree KPI steering upright, and -0.5 towing range axle style

Upgraded inside rod fulcrum mount at the front upper arm includes a 10-step height adjustment and two side positions

Updated HT "Short" back lower arm

The fulcrum at the rear suspension upper rod includes a 5-step adjustment on both sides and the external fulcrum is 4-step adjustable on both sides

2 motor mounting choices – High or Low center of mass

Oil filled high performance shocks

Full ball bearings throughout

Steel CVD axle transmission system

Realistic caliper and disc shape brake set

Battery mount accommodates both basic and "shorty" style battery loads

Hobbywing XBL 2500Kv brushless motor

Hobbywing XBL50 brushless ESC

MST SC-0352 high speed steering servo 

MGX Steering Gyro

Realistic drift wheel and tire plan

Requirements:

Size: 1/10 Drift Automobile

Wheelbase: 257mm

Width: 190mm

Hex to Hex Width: F178mm / R171mm

Drive mode: RWD

Caster: Adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.5 RTR Wander Vehicle

XTR-03 2.4GHz Radio System

XBL 2500Kv Brushless Motor

XBL50 Brushless ESC

MST SC-0352 Servo

Guiding Gyro

Realistic Street Tires

Required To Complete:

(1) TWO LiPo or 6-Cell NiMH Battery Pack w/T-Style Port

(1) Compatible Battery Charger

(4) "AA" Batteries (for transmitter)