MST RMX 2.0 1/10 2WD Brushless ATR Drift Car w/JZ3 Body (Clear)

Rear Wheel Drive, High-Performance ATR Wander Kit - with Clear JZ3 Body!

The MST RMX 2.0 ATR builds on the success of the RMX 2.0 S Kit, offering the exact same careful style functions that deliver a brand-new sense of speed and easy control angles. If you have been waiting on the right cars and truck to get into the drift scene, the RMX 2.0 ATR is the kit you have been waiting on. This remarkable kit includes a clear JZ3 body that permits you to apply your own custom paint scheme right out of the box.

NOTE:

MST test drives their lorries so it is normal for there to be slight marks on the tires.

Wheels displayed in images may not be the wheels you get. The maker includes random wheels. 

Painted body displayed in images is for illustrative functions just. The item you will get is clear and unpainted.

Features:

2 motor install options – upper or lower gravity

2 servo install options – vertical or lateral

Plastic high rigidness building and construction

Distinct front suspension system for great steering

The adjustable steering system with two-step Ackermann changes

6 degrees KPI guiding upright, and -0.5 towing range axle style

Inside rod fulcrum mount at the front upper arm functions 10-step height modification and both side positions

Fully-sealed dustproof bevel equipment transmission system

Requirement ball differential

5 adjustable second-deceleration-ratio equipment sets of 1.89-3.82 (standard 3.08)

The fulcrum at the rear suspension upper rod is 5-step adjustable on both sides. The outer fulcrum is 4-step adjustable on both sides

Steel CVD axle of rear transmission system

Appropriate for long and short battery

Full great smooth metal ball adapters

Requirement realistic caliper and disc shape brake set

Requirements:

Size: 1/10 Drift Cars and truck

Wheelbase: 257mm

Width: 190mm

Drive mode: RWD

Caster: adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing transmission system

Damper: Hydraulic damper set

Consists of:

RMX 2.0 ATR Drifter with:

XTR-02 2.4GHz Radio System (Set Up)

XBL 2500kV Brushless Motor (Set Up)

XBL50 Brushless ESC (Set Up)

AX-251 Servo (Set Up)

LSD X Gyro (Set Up)

Realistic Street Tires (Set Up)

With JZ3 Body (Clear)

Needed To Complete:

(1) 2S LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector

(1) Suitable Battery Battery Charger

(4) "AA" Batteries (for transmitter)

Polycarbonate Paint for Body