Losi 8IGHT Nitro RTR: 1/8 4WD Buggy

Functions



Your fast lane to nitro buggy racing4mm T-6 aluminum chassis plateGen III radio tray for longer servo lifeDynamite® .21 nitro engine with pull startPre-set suspension geometryMetal-gear transmission and sealed differentialsCenter and rear dogbones15mm adjustable oil-filled shocksSpektrum™ water resistant metal-gear servosIncludes Spektrum DX2E DSMR® transmitterIncludes Dynamite 1600mAh 6V NiMH receiver pack




Overview


If you are major about ending up being a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes entirely put together and equipped with the brute power of a Dynamite® .21 nitro engine and the exact response that only a Spektrum™ DSMR® radio system can supply. You likewise get the benefit of a pre-set suspension that shares the same geometry team chauffeurs utilize on their 8IGHT buggies. As your abilities development and you gain more racing experience, you can slowly update the automobile's efficiency with much of the 8IGHT option parts presently available.
Race-Proven Toughness
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy utilizes a Gen III radio tray that lengthens steering and throttle servo life with features like ball-bearing linkages and more precise linkage alignment. It has actually been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right from package. It is equipped with a convenient pull-start so you do not have to purchase a starter box to get racing best away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the toughness it requires for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and enhance bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by expert team chauffeurs so you can strike the track with self-confidence. And since it utilizes fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.






Tech Notes


You will need...
• 20–30% Nitromethane fuel
• Nitromethane-Approved Dispenser
• NiMH Battery charger
• Glow Igniter






Specs


Type: Nitro Buggy
Scale: 1/8
Length: 19.6 in (497mm)
Width: 12.1 in (308mm)
Height: 7.1 in (180mm)
Ground Clearance: 2.4 in (60mm)
Wheelbase: 12.7 -12.9 in (323-327mm)
Weight: 7.8 lb (3.5kg)
Chassis: 4mm, 6061 T-6 Aluminum
Suspension: Independent
Drivetrain: 4WD
Motor or Engine: .21 Dynamite
Radio: Spektrum DX2E 2-Channel
Servos: Consisted of
Batteries: Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch: 1.0Mod
Kit/RTR: RTR
Shock Type: 16mm Big Bore Aluminum Oil Filled
Body: 8IGHT Taxi -Forward, Screened
Ball Bearings: Yes
Fuel Tank Capability: 125cc (4.2 Oz)
Experience Level: Intermediate
Recommended Environment: Outdoor
Is Assembly Required: No





Media Gallery





 View Image Gallery