Kyosho Wave Chopper 2.0 Blue

Kyosho brings the enjoyable back to the water with the revival of the Wave Chopper, initially released in 2001! To update the new age Chopper 2.0 with contemporary RC technology and efficiency, an upgraded rudder, stern tube and motor install in the 1/6th hull with new rider figure integrate with the most recent RC elements. Ideal torque from the G14L water cooled 550 class motor works perfectly with the big capability Kyosho Speed Home KA60-91W speed controller to provide crisp acceleration and racy efficiency while lowering heat loss. Styrene drifts offer buoyancy that make the hull unsinkable, even if it is not entirely waterproof. As both hull and rider are pre-assembled, just set up 4 X AA batteries (sold individually) into the transmitter, charge the consisted of NiMH battery, and install the rider figure to begin making a splash! The Wave Chopper 2.0 brings the enjoyable of marine sports to everybody with this compact package!

Kick up rudder protects both the rudder and hull from unforeseen contact and delivers smooth turning efficiency. Built in water consumption channels water into the cooling coat on the motor for reliable cooling.

Optimal angle of the stern tube along the bottom of the hull decreases drive resistance enabling the totally submerged prop to produce fast and smooth acceleration.

Pre-installed 550 class G14L motor is fitted with a water cooling system to avoid heat loss. High rigidness suspended motor install optimizes drive efficiency and easy maintenance.

7.2V 2200mah battery and USB delte peak charger are consisted of with the pre-assembled hull and 2.4ghz transmitter. Just set up 4XAA batteries (Not consisted of) into the transmitter and charge the battery, then this design can be taken pleasure in by anyone.

Readyset Contents

Totally put together hull

Syncro KT231P+ transmitter

Injection molded boat stand

Pre painted figure

Hex wrenches 1.5 & 2.5mm

Spanner 4.0 & 5.5mm

Antenna tube

7.2V 2200 mAh Ni-MH battery and USB delta peak charger

PVC tape for waterproofing

Requirements:

Product Created: 07/30/2020