Hyperion Hyperion Light Y connector 7

Universal, High-Quality Servo LIGHT WIRE Y-CONNECTOR with Gold Pins-Sockets-180mm
These are the brand-new "Light" cable televisions for small models, where conserving every gram counts. Hyperion Servo Connectors are made in Korea to the greatest standards, and contacts are plated with quality gold. Your model depending on those servos, so get great cable televisions! They are "universal", indicating that any Male servo connector will fit the Futaba-style Female on the Hyperion cable, and any Female servo connector will fit the JR-type Male end. Wires are 0.15qmm (~25 AWG) 30 strand

When describing Male and Female, we are speaking about the Plastic Covers - not the metal ports inside!

Below is a wonderful item that numerous others have bought at the same time.



Several others have purchased this item in addition to the item that you are presently checking out.

Mini-Ny Steel Pushrod Assembly

This is a Light-weight pushrod assembly perfect for 1/2A applications. The
assembly includes a plastic outer tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- small plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Requirements: Rod length 19" rod size 1/32"
Plastic tube 16" tube inner dia. 1/16" outer dia.1/8"

Below is a wonderful item that numerous others have bought at the same time.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [high])
2 mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

You will certainly enjoy this thing if you have the thing just above mentioned.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made using a pultrusion process. This technique
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a greater fiber (60%) to resin (nylon binder)
    density. Providing significantly greater strength and tightness than
    glass filled nylon.
The additional tightness is useful to control of vibration
    resonance response.
The greater strength permits the usage of thinner cross-sections,
    useful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

You will certainly enjoy this thing if you have the thing just above mentioned.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Connector
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Supplies a safe and secure connection for battery and motor connections

INCLUDES:
2 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001