HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Equipment for the HPI Savage .25.

FUNCTIONS:
Black plastic building and construction

SUCHES AS:
One 47T spur equipment
One clutch pad HPIC7231

This is a fantastic addition to the product presently being talked about.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
2 Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

REMARKS:
None.

This product compliments the main item right here.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Likewise fits the Roto Start for the Savage.**
    This One-Way Bearing allows the recoil starter to get hold of
the crankshaft to begin the engine and spin easily in the opposite direction.

FEATURES:
Steel building and construction

SUCHES AS:
One one-way bearing
One installation instruction sheet

NEEDS:
Installing in recoil unit

SPECS:
General Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

REMARKS:
If recoil unit is required, use HPIG1428

Get this product to boost the one you read around.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
usage with the Savage X 4.6

FUNCTIONS:
Fiberglass building and construction
Aluminum Disc Plates
For usage with the 6 x 19 x 21mm Cup Joints (HPIC6322)

SUCHES AS:
2 Fiberglass Brake Disk
3 disc plates
Mounting hardware

NEEDS:
Installation on the automobile

SPECS:
Diameter: 35.5mm
Thickness: 2.7mm

REMARKS:
Likewise works on the Savage XL
For the Cup Joint, order HPIC6322

This product compliments the above talked about product.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part lies on the spur gear.

FEATURES:
Stainless steel building and construction

SUCHES AS:
One slipper plate

NEEDS:
Installation on the automobile

SPECS:
External diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

REMARKS:
This part is specific to the Nitro Rush.