HPI Nitro Star G3.0 Engine, W/Pullstart, 6.5Mm Rotary Carb, Sg Shaft

This is the HPI Nitro Star G3.0 Engine with Pull Beginner
used in the HPI Fire Storm

FEATURES:
Composite body rotary valve carburetor with 5.5mm bore
Silver colored cooling head
SG (pilot) type crankshaft
2 year limited service warranty

INCLUDES:
HPI Nitro Star G3.0 Engine with Pull Start, user's manual,
    R5 cold radiance plug (HPIG1504), foam air cleaner assembly with 4
    zip ties, brass collet

REQUIRES:
Fuel: Cars and truck blend with 20-25% nitro content
Misc Products: Fuel tubing and track devices

SPECIFICATIONS:
Specs such as horsepower, bore, stroke and RPM were not supplied-
    contact HPI for further infomation
High Speed Needle Setting: Turn clockwise in 1/8 turn increments
    to lean fuel mixture. Do not exceed 2-1/2 turns from flush
Idle Modification: Adjust for about 0.04" (1mm) gap in between slide valve
    and carbohydrate body at bore opening
Low Speed Needle: No modification advised
Displacement: .18 cu in (3.0cc)

Distance Between Mounting Holes Very Same Side: 0.43" (11mm)
Distance Between Mounting Holes Reverse Side: 1.22" (31mm)
Height/Bottom Mounting Flanges to Top of Cylinder Head: 2.99" (76mm)
Height/Bottom of Crankcase to Top of Cylinder Head: 3.5" (89mm)
Length from Pull Beginner to End of Crankshaft: 4.13" (105mm)
Length from Pull Beginner to Front Bearing: 3.3" (75.3mm)
Length from Center of Crankcase to End of Crankshaft: 2.96" (75mm)
Size of Carburetor Bore: 0.21" (5.5mm)