HPI Connector, Tamiya Plug To Mini Plug, Micro Rs4)

This is a Motor Connector for the Micro RS4.

FUNCTIONS: Plastic and wire construction

CONSISTS OF: One motor adapter w/a Tamiya plug on one end and a Mini plug
on the other.

NEEDS: Setting up onto automobile

SPECS: Length: 60mm consisting of both plugs

tjt 9/27/

Below is a wonderful product that numerous others have actually bought at the very same time.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack.

FEATURES:
For use with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can likewise be utilized in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female adapter

NEEDS:
Battery charger capable of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Ranked Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Release Lead: 20AWG 2.4" (60mm) long wire
Load Dimensions: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Connector: 1/18 scale mini female

Frequently bought with the product that you are presently reviewing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR MT4.18 Beast Truck from Dromida.

FEATURES:
Chassis: Plastic tub
Drive: 4 wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 water resistant ESC/receiver, water resistant guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: AC wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled huge bore composite body, with several installing
    areas
Bumpers: Flexible plastic, front and rear
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with offroad tread, gray plastic
    wheels, width: 1.2" (29.5mm), external size 2.5" (65mm), hex size
    0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Warranty: Ninety day limited start at date of purchase

CONSISTS OF:
RTR MT4.18 Beast Truck with 2.4GHz Radio, Brushed Motor,
    Printed Body, 4 AA Batteries, 7.2V Battery, AC Wall Battery charger,
    Guidelines

SPECS:
Vehicle;
Length: 10.6" (270mm)
Width: 7.5" (190mm)
Height: 4.3" (110mm)
Gear Ratio: 10.4:1
    Body;
Length: 9.8" (250mm)
Width: 3.7" (95mm)
Height: 2.5" (65mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Kit
    (DIDC1150) that includes a Brushless Motor, 25A ESC and other
    updated parts. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is suggested for best outcomes and highest speed with
    this conversion package.
**Do NOT utilize LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.