HPI Bullet Stadium Truck 3.0 RTR

This is the radio controlled, glow powered, prepared to run, 1/10 scale
Bullet ST 3.0 Arena Truck from HPI.

**Extra Technical Information Will Be Added When It Appears.**

FEATURES:
Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
    rear skid plates and aluminum center brace
Own: Four wheel sealed shaft drive
Radio: 2.4GHz with end point modifications, dual rates,
    servo reverse, water resistant SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
    rain cover, two needle composite body slide valve carburetor, and
    ABC liner building and construction, "A"luminum piston with "B"rass cylinder
    liner that is "C"hrome plated
Exhaust: Tuned aluminum pipeline
Clutch: 2 piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: 8 oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Complete set, rubber sealed
Body: Trimmed and painted
Suspension: Additional long arms with steel turnbuckle links
Slipper Clutch: Double pad, adjustable
Spur Equipment: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2" (56mm) large, 3.2"
    (82mm) size
Tires: HPI Ammunition all surface 2.6" (67mm) large, 4.8" (124mm)
    size
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the car in relation to
    the chassis
Camber: Adjustable front and rear, camber describes the angle of the
    tops of the tires from vertical when seen from front or behind
    automobile
Guarantee: 2 year restricted start at date of purchase. Valid only
    in US, Canada and South America. Not meant for usage in the EU.

INCLUDES:
RTR HPI Bullet ST 3.0 Arena Truck with Engine, Exhaust, 2.4GHz
    Radio, painted Body, 8 AA cells and User's manual

REQUIRES:
Shine Fuel: Vehicle blend nitromethane with 20-25% nitro material
Fuel bottle, glow starter, upkeep and track devices

SPECIFICATIONS:
Lorry;
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) external edges of tires side-to-side
    Body;
Length: 16.1" (409mm)
Width: 6.7" (170mm)
Height: 4.4" (112mm)

REMARKS:
For replacement ball bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Equipment 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535