Manufacturer Description

This is the radio controlled, glow powered, ready to run, 1/10 scale
Bullet ST 3.0 Stadium Truck from HPI.


**Additional Technical Info Will Be Added When It Becomes Available.**


FEATURES:
Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
    rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: 2.4GHz with end point adjustments, dual rates,
    servo reverse, waterproof SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
    rain cover, two needle composite body slide valve carburetor, and
    ABC liner construction, "A"luminum piston with "B"rass cylinder
    liner that is "C"hrome plated
Exhaust: Tuned aluminum pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2" (56mm) wide, 3.2"
    (82mm) diameter
Tires: HPI Ammunition all terrain 2.6" (67mm) wide, 4.8" (124mm)
    diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to
    the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
    tops of the tires from vertical when viewed from front or behind
    vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
    in US, Canada and South America. Not intended for use in the EU.


INCLUDES:
RTR HPI Bullet ST 3.0 Stadium Truck with Engine, Exhaust, 2.4GHz
    Radio, painted Body, 8 AA cells and Instruction Manual


REQUIRES:
Glow Fuel: Car blend nitromethane with 20-25% nitro content
Fuel bottle, glow starter, maintenance and track equipment


SPECS:
Vehicle;
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
    Body;
Length: 16.1" (409mm)
Width: 6.7" (170mm)
Height: 4.4" (112mm)


COMMENTS:
For replacement ball bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535




BOX DIMENSIONS: 14.70" W. X 7.25" H. X 20.75" L.
BOX WEIGHT: 10.00 LBS.