HPI Bullet Stadium Truck 3.0 RTR

This is the radio managed, radiance powered, ready to run, 1/10 scale
Bullet ST 3.0 Stadium Truck from HPI.

**Additional Technical Info Will Be Included When It Becomes Available.**

FUNCTIONS:
Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
    rear skid plates and aluminum center brace
Own: Four wheel sealed shaft drive
Radio: 2.4GHz with end point modifications, double rates,
    servo reverse, waterproof SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, 2 stage air filter with
    rain cover, 2 needle composite body slide valve carburetor, and
    ABC liner construction, "A"luminum piston with "B"rass cylinder
    liner that is "C"hrome plated
Exhaust: Tuned aluminum pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel equipment
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Bonus long arms with steel turnbuckle links
Slipper Clutch: Double pad, adjustable
Spur Equipment: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2" (56mm) large, 3.2"
    (82mm) diameter
Tires: HPI Ammo all terrain 2.6" (67mm) large, 4.8" (124mm)
    diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the vehicle in relation to
    the chassis
Camber: Adjustable front and back, camber refers to the angle of the
    tops of the tires from vertical when viewed from front or behind
    automobile
Guarantee: Two year limited beginning at date of purchase. Valid just
    in United States, Canada and South America. Not intended for usage in the EU.

INCLUDES:
RTR HPI Bullet ST 3.0 Stadium Truck with Engine, Exhaust, 2.4GHz
    Radio, painted Body, 8 AA cells and User's manual

NEEDS:
Glow Fuel: Cars and truck blend nitromethane with 20-25% nitro content
Fuel bottle, radiance starter, upkeep and track devices

SPECIFICATIONS:
Car;
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
    Body;
Length: 16.1" (409mm)
Width: 6.7" (170mm)
Height: 4.4" (112mm)

REMARKS:
For replacement ball bearings utilize:
    Qty. Size Place Qty. Bearing Set
2 10x15mm Spur Equipment 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Centers 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535