HPI Bullet Monster Truck 3.0 RTR

This is the radio controlled, glow powered, all set to run, 1/10 scale
Bullet MT 3.0 Beast Truck from HPI.

**Additional Technical Details Will Be Added When It Becomes Available.**

FUNCTIONS:
Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
    rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: 2.4GHz with end point changes, dual rates,
    servo reverse, waterproof steering and throttle servos
Throttle and Steering Servos: SF-10W Waterproof/
    4.5kg-cm6.0V (HPIM4105)
Engine: Nitro Star G3.0 with pull starter, 2 stage air filter with
    rain cover, 2 needle composite body slide valve carburetor, and
    ABC liner construction, "A"luminum piston with "B"rass cylinder
    liner that is "C"hrome plated
Exhaust: Aluminum tuned pipeline
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: 8 oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Cut and painted
Suspension: Additional long arms with steel turnbuckle links
Slipper Clutch: Double pad, adjustable
Spur Equipment: 54 tooth plastic
Tires: All surface 2.6" (67mm) large, 4.8" (124mm) diameter
Wheels: 5 Spoke black chrome finish, 14mm hex, 2.2" (56mm) large
    3.2" (82mm) diameter
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the automobile in relation to
    the chassis
Camber: Adjustable front and back, camber describes the angle of the
    tops of the tires from vertical when seen from front or behind
    car

Warranty: Two year restricted beginning at date of purchase. Valid just
    in United States, Canada and South America. Not planned for usage in the EU.

INCLUDES:
RTR HPI Bullet MT 3.0 Beast Truck with Engine, Exhaust, 2.4GHz
    Radio, eight AA Batteries, painted Body and User's manual

REQUIRES:
Shine Fuel: Car blend nitromethane with 20-25% nitro content
Fuel bottle, glow starter upkeep & track devices

SPECIFICATIONS:
Car;
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
    Body;
Length: 16.3" (415mm)
Width: 6.8" (174mm)
Height: 4.7" (120mm)

REMARKS:
For replacement ball bearings utilize:
    Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Equipment 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Back Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Back Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Centers 2 DTXC1535
4 5x10mm Back Hubs 2 DTXC1535