HPI Body Pin, 6Mm, Silver/Medium, (20Pcs)

This is a bundle of Medium Chrome Body Pins from HPI.

FEATURES:
Chrome surface
Functions resilient steel construction.

INCLUDES:
Suches as twenty medium body pins.

SPECS:
Length: 0.83" (21mm)

This item is often gotten with the above mentioned item.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal Four Plug System permits connectivity between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    just connect wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Car balancer (TCPP9150)

SPECS:
Configuration: TWO
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

COMMENTS:
CHECK OUT the ENTIRE direction sheet included with battery before usage
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER dismantle or modify pack wiring in any method or puncture cells
NEVER put on flammable products or leave unattended throughout
charging
ALWAYS charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

Frequently gotten with the item that you are currently checking out.

EC3 Female to Deans Ultra-type Male Conversion Adapter

Do not want to slice the existing connector off of your ESC or battery? Want to save yourself a bunch of soldering time? This EC3 Female to Deans Ultra-type Male Conversion Adapter is the fast, easy and inexpensive option for your mismatched connector.

You will certainly love this thing if you have the thing previously discussed.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

This is a amazing enhancement to the item currently being discussed.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel building and construction

INCLUDES:
One spring

COMMENTS:
The HPI Racing Bullet Series suches as
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)