HPI Baja 5B SS Kit

This is the 1/5 scale, fuel powered, radio controlled,
HPI Baja 5B SS Buggy kit.

**New factory high efficiency options for 2014 include;**
#87288 Steel Exhaust Header, HPIG8611
#15448 8000RPM High Response Clutch, HPIC1548
#87568 Aluminum Alloy Diff Case
#104966 Super Strong Dogbones, HPIC4966
#112845 Super Strong Front Hubs
#104781 One-Piece Back Uprights, HPIC4781

FEATURES:
Chassis: Narrow channel monocoque style 0.16" (4mm) thick, gun-metal
    gray in color, built of aircraft grade 6061 T6 aluminum,
    side guards protect engine from dirt and debris
Drive: Rear wheel gear drive with heavy duty dogbones
Engine: Fuelie 26S gas engine with pull starter,
    fast release foam air filter, primer, choke and kill switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Ball Bearings: Complete set consisted of
Shocks: Four VVC heavy duty aluminum shocks with 5 externally
    adjustable dampening settings and double rate springs for
    progressive dampening action on all surfaces, customized rear shock
    tower brace
Main Gear: 57 tooth composite building
Transmission: Sealed, heavy duty metal equipments
Differential: Thick Torque Control can be tuned utilizing different
    weight diff oils, hardened metal planetary equipments, aluminum alloy
    diff case
Brakes: Ventilated double disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) large
    6.7" (170mm) outer size
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm)
    large, 6.7" (170mm) outer size
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to
    wheel to hold tire firmly in place-no need for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals used
Roll Cage: Baja design high effect nylon secures engine and body
    from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees
    caster/toe-in describes the angle of the front
    suspension when seen from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Guarantee: 2-year restricted, legitimate only in USA, Canada and South America
Baja light sets are available - HPIC0336 (white) HPIC0337 (blue)

INCLUDES:
HPI Baja 5B SS kit, engine, guiding servo, 2oz (60cc) shock oil,
    1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease
    body, with wing, extra air filter, wrenches, decal sheet and
    illustrated user's manual, 3.4oz (100cc) Z191 2-cycle oil

NEEDS:
Radio: 2-3 ch FM or 2.4GHz with basic size servo for throttle
    (do not utilize AM radio)
Receiver Battery: 6V hump setup, at least 3000mAh
Battery Charger: Timed or peak for receiver pack
Unleaded Fuel: 87-93 octane, mix fuel and 2 cycle oil
    at 25:1 ratio,
Transmitter Batteries: AA, number depends upon chosen transmitter
Paint: Spray or brush-on for polycarbonate bodies
Structure and track devices

SPECIFICATIONS:
Vehicle-
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Flight Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 pounds (9.6kg) without fuel
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
_ Front Track: 15.5" (395mm)
Rear Track: 15.7" (400mm) outer edges of wheels
Gear Ratio: 8.382:1
Tires- Front: 2.4" (60mm) x 6.7" (170mm)
Back: 3.1" (80mm) x 6.7" (170mm)
    Body-
Length: 22.9" (581mm)
Width: 8.8" (224mm) at rear wheels (best point)
3.25" (82mm) ahead of front wheels (thinnest point)
Height: 4.75" (121mm) at highest point

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty Bearing Set
4 12x24mm Fr Wheel Hubs 2 HPIC0089
4 12x24mm R Wheel Hubs 2 HPIC0089
2 10x15mm Steering Shafts 1 DTXC1595
2 17x30mm Idler Gear 1 HPIC0092
2 12x24mm Drive Gear 1 HPIC0089
1 12x24mm Spur Gear Mount 1 HPIC0089
2 10x15mm Diff 1 DTXC1595