Hot Racing Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Outlaw, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Cars

FEATURES:
CNC aluminum building and construction diff case, black in color
Hardened steel gear
Sealed differentials allows tuning to track conditions by changing
    weight of diff oil
4 O-rings help seal versus fluid leak
Thirty day limited service warranty starting at date of purchase- valid
    in the United States just

CONSISTS OF:
Sealed Differential Case
4 O-Rings
Two Screws

SPECS:
Outdoors Diameter: 1.48" (37.5mm)
Shaft Diameter: .200" (5.10mm)
General Thickness: 0834" (21.2mm)

Here is a wonderful thing that several others have purchased the exact same time.

Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FEATURES:
All these equipments and shafts are made from metal(most likely with a low
amount of steel).

CONSISTS OF:
4- planetary equipments
4- planteary gear shafts
2- sun equipments
1- sun gear positioning shaft

WAJ
1/16/94

Here is a wonderful thing that several others have purchased the exact same time.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

Regularly gotten with the thing that you are currently checking out.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Outlaw, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Lightweight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio mixes
CNC 6061 aluminum motor plate, heat sink and arm mount
Larger open location for a larger motor heat sink
Thirty day limited service warranty starting at date of purchase-valid
    in the United States just

CONSISTS OF:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Many others have gotten this thing in addition to the thing that you are currently checking out.

Silicone Diff Fluid 60,000 Cst, 2Oz

This is the Factory Group 60,000cst Diff Fluid from Associated.
This can be used in any application that requires diff fluid.

FEATURES:
Customized blend silicone
Clear liquid
Bottle consists of 2oz (59ml) of fluid

CONSISTS OF:
One 2oz (59ml) bottle of 60,000cst diff fluid

Many others have gotten this thing in addition to the thing that you are currently checking out.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This thing praises the main item right here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on car

Get this thing to enhance the one you are reading about.

Oil Differential 500K Weight

    This is the 500K Weight Differential Oil from Traxxas.

FEATURES:
Lubes differential
Clear in color
500K weight

CONSISTS OF:
One .70oz (20cc) Bottle Of 500K Diff Lube

REQUIRES:
Application to differential