Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined strong brass billet

9g each fitted to the wheels to decrease the automobiles center of mass, increase its stability, enhance climbing, reduce the chance for turning in reverse, and make for a general more capable crawler

Friction fit to within KMC Machete wheels. Some CA glue can be utilized to protect installation

Can be utilized either in front of rear, however if you're only getting one set we advise using them in the front

Requirements:

Center: 12mm hex

For : AXI31615

Diameter of outer : 21.4mm

Diameter of within : 12mm

Weight: 9.5g/ea

Width: 8mm

Regularly purchased with the item that you are presently reviewing.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and centralized area to decrease the car's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined strong brass billet

Adds 9g of low and main weight to lower and centralize the car's center of mass, increase its stability, and make it an

Overall more capable crawler

mm increased thickness over stock cover for additional strength and weight

Fits either the front or rear

Requirements:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want another fantastic item to enhance the above mentioned item?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Steering Knuckle, for Axial SCX24

Hot Racing sturdy brass SCX24 Worm equipment Axles guiding knuckles (guiding blocks) for the Axial SCX24 axles. Include weight to your crawler where it needs it - down low.

Features:

CNC machined strong brass

Heavy to add weight to car for higher stability and lower CG

Cutouts on knuckle for access to outer bearing race for simple bearing elimination

Direct replacement for factory plastic guiding knuckles

Want another fantastic item to enhance the above mentioned item?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Functions:

CNC Machined Solid Brass construction.

You Will Get:

Four Hex Wheel Hubs

Four 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Here is a fantastic item that several others have purchased the exact same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for usage with Axial SCX 24.

Functions:

Billet CNC machined aluminum

Anodized a trendy flat black

Integrated brush guards

Light buckets for 3mm LED lights

Requirements:

Width: 58mm

Height: 8mm

Here is a fantastic item that several others have purchased the exact same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with practical light bar
• Reasonable motorist figure and many other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles include a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated tank and durable plastic suspension links deliver proven Axial crawling efficiency
• Front and rear differentials each house a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive likewise offers a low equipment ratio to reduce torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to take on tough climbs and rough trails. Like the bigger SCX10™ chassis, this smaller sized variation uses a lot of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling efficiency even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts skills and charisma on the trails. Take a look at that Deadbolt body — with its narrow stance, bulging hood, practical motorist figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its novice appeal, the SCX24 Deadbolt comes 100% complete and prepared to run. Everything needed for action remains in package: put together and finished car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and durable steel c-channel frame rails with bracing to keep everything undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the right amount of torque to help ascend steep climbs. It's mated to a steel motor install to keep flex to a minimum, which assists protect the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running during tough climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated tanks and durable plastic suspension links delivers the crawling efficiency you've known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle style. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are consisted of and are mounted in the front bumper. An additional LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is enhanced to reduce axle steer and torque twist. We've likewise consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are legendary in the off-road world. They are formed in black and function stunning scale details, in spite of the small scale.
The officially accredited Nitto Trail Grappler M/T Tires use a great mix of off-road efficiency while still retaining outstanding composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board elements. You can quickly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size doesn't imply the functions require to follow suit. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the entire car.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for guiding precision, while likewise providing defense for the servo gears in case of a bind or effect.
 

Requirements

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No