HOBBYWING Xerun D10 Brushless Drift Motor - 13.5T, 2900Kv, Spirit Edition

Elegantly created for drift

The Xerun D10 motors supply the perfect colors to perfectly match your drift machines. Available in Black, Red, and Purple.

Banana plug-in quick-swap design

The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is likewise consisted of in the XD10 ESC.

New stator created for drift applications

The new motor stator is optimized for drift and enhances motor effectiveness in drift applications. Integrated with high-precision sensing units board, integrated with drift-specific fan rotors, supplying excellent motor linearity and drivability while

greatly enhances motor efficiency.

Lightweight

The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (consisting of 3 gold insert weights). The lightweight motor enables user to easily fine-tune their weight predisposition on their car.

Equipped with fan rotor,

Offering terrific heat dissipation, power the special-shaped gold fan on the rotor heats up the motor while making an enjoyable sound, particularly when Turbo is turned on.

Best paired with XD10 PRO ESC

ESSENTIAL NOTES:

The D10 motors supply a wide variety of adjustable mechanical timings, the following are the techniques & concepts you can follow when adjusting the timing.

You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as required according to the mark (/white lines) at the rear end of the motor and attach the screw after the adjustment. For getting ideal performance, you can alter the output variety and attributes of your power system by adjusting the motor timing.

Increasing the timing can increase the motor speed (/RPM), while that likewise increases the motor temperature level and reduces the effectiveness. A high(er) timing normally requires a high(er) ratio.

Please guarantee your ESC is correctly programmed prior to setting the motor timing. For detailed details about ESC shows, please refer to the user handbook of the ESC.

After the timing adjustment, please guarantee that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the details about the motor temperature level by means of a infra-red temperature level weapon. If the temperature level is expensive, please let the motor cool down initially and after that test again. If the temperature level is still expensive, then please minimize the timing or increase the FDR (that is to change the pinion gear with fewer teeth or stimulate gear with more teeth.).

Specifications:

Item Developed: 10/06/2021