HOBBYWING Flyfun V5 High Voltage Esc (6S - 14S)

FlyFun 110, 130 and 160HV designs will just allow shows modifications utilizing LED program card (purchase separately) and do not support "Transmitter" or "Stick" setting changes as the weblisting and handbooks state.

ESC which features a high efficiency 32-bit ARM M4 microprocessor (with a running frequency of as much as 72MHz) works with different brushless motors.

Microprocessor powered by a separate DC regulator has much better anti-interference efficiency greatly decreases the possibility of losing control.

DEO (Driving Effectiveness Optimization) Innovation greatly improves throttle response & driving performance and decreases ESC temperature.

Built-in high-power BEC with output voltage adjustable among 5.2V, 6.0V and 7.4V. The BEC module is different from other circuits on the ESC, so the typical BEC output can be ensured (when concern like scorched power board happens) to allow users to get the airplane back before crash. (Note: the FLYFUN 80A/120A/130A/160A-HV-OPTO-V5 does not have this function.)

Normal/Soft/Very Soft start-up modes are compatible with routine propeller planes and EDF jet planes (pls guarantee to choose the "Really Soft Start-up" mode when utilizing EDF jet planes). Different shows cable for linking ESC to a LED program box and permits users to program the ESC anytime, anywhere. (For in-depth info, please refer to the user manual of HOBBYWING LED program box.)

Normal/proportional/reverse brake modes (esp. reverse brake mode) can efficiently shorten the landing distance for the airplane. (Note: the FLYFUN 130A/160A-HV-OPTO-V5 does not have this function.)

Several protection functions like start-up, ESC thermal, capacitor thermal, over-current, over-load, irregular input voltage and throttle signal loss efficiently lengthen the service life of the ESC.

Item Developed: 06/30/2020