Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

CONSISTS OF:
Balance board
Balance lead

REQUIRES:
Linking in between battery charger and batteries

Several others have actually bought this product along with the product that you are currently reading about.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Connects a battery with a Traxxas Female plug to a battery charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Connector

Get this product to boost the one you are reading around.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Perfect for 1/10 scale automobile applications
Prewired with Star Plug
Star plug works with the R/C market's most commonly utilized
    polarized power plug, tapered shape and grip strips for quick and
    simple connection and separation

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Rated Capability: 5000mAh
Discharge Rating: 25C continuous
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Connector: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER location on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a fantastic enhancement to the product currently being gone over.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Connects a battery with an EC3 male plug to a battery charger with 4mm
    input jacks
14 AWG wire

CONSISTS OF:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This product praises the main item here.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Instantly controls present rate throughout charging and discharging
    procedure
4 independent 50-watt power outputs charges up to 4 batteries
    at the same time
4 independent balancing ports for lithium batteries
Five user adjustable presets per output
Twin fan cooling system with internal sensing unit for managing fan
    speed
Batteries can be set to immediately Charge/Discharge or Discharge/
    Charge up to an optimum of 5 cycles
Automatic charge termination* if battery temperature gets expensive
    *Temperature level probe (HRCP4159) is needed and need to be acquired
    individually
PC-based program can examine the qualities of each battery by means of
    a USB port*, chart of voltage, present and capability curves with
    specific voltage of each cell in a lithium pack can be shown
    on a PC- *PC-LINK USB adaptor is needed and need to be acquired
    individually, HRCP4168

CONSISTS OF:
Hitec X4 Plus AC/DC Powered Multi Charger with AC and DC Input Cables
    Battery Clamps, Tamiya Charge Connector, RX Battery Charge
    Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Connectors, Alligator Clip Charging Connector and Handbook

SPECS:
Input Voltage: AC, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)