Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery packs

CONSISTS OF:
Balance board
Balance lead

NEEDS:
Linking in between battery charger and batteries

Many others have actually gotten this thing together with the thing that you are presently checking out.



This is the Venom Traxxas Male to Battery charger Adapter.

FEATURES:
Connects a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Connector

Get this thing to enhance the one you are reading about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Ideal for 1/10 scale automobile applications
Prewired with Star Plug
Star plug is compatible with the R/C market's most typically used
    polarized power plug, tapered shape and grip strips for quick and
    simple connection and separation

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capacity: 5000mAh
Discharge Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Balancing Connector: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER take apart or customize pack circuitry in any method or puncture cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a wonderful addition to the thing presently being discussed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Battery charger Adapter.

FEATURES:
Connects a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

CONSISTS OF:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This thing praises the main item right here.



This is the Hitec X4 Plus AC/DC Powered Multi Battery charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Immediately controls existing rate throughout charging and releasing
    procedure
Four independent 50-watt power outputs charges up to 4 batteries
    simultaneously
Four independent balancing ports for lithium batteries
Five user adjustable presets per output
Twin fan cooling system with internal sensing unit for managing fan
    speed
Batteries can be set to automatically Charge/Discharge or Discharge/
    Charge up to an optimum of 5 cycles
Automatic charge termination* if battery temperature level gets too high
    *Temperature level probe (HRCP4159) is required and should be acquired
    separately
PC-based program can examine the attributes of each battery by means of
    a USB port*, graph of voltage, existing and capacity curves with
    specific voltage of each cell in a lithium pack can be shown
    on a PC- *PC-LINK USB adaptor is required and should be acquired
    separately, HRCP4168

CONSISTS OF:
Hitec X4 Plus AC/DC Powered Multi Battery charger with Air Conditioning and DC Input Cables
    Battery Clamps, Tamiya Charge Connector, RX Battery Charge
    Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Connectors, Alligator Clip Charging Connector and Manual

SPECIFICATIONS:
Input Voltage: Air Conditioning, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Existing: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)