Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery packs

INCLUDES:
Balance board
Balance lead

NEEDS:
Connecting in between battery charger and batteries

Many others have purchased this thing in addition to the thing that you are presently reading about.



This is the Venom Traxxas Male to Battery charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Connector

Get this thing to enhance the one you read about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Star Plug
Star plug is compatible with the R/C market's most commonly used
    polarized power plug, tapered shape and grip strips for fast and
    simple connection and separation

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Rated Capability: 5000mAh
Discharge Rating: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Connector: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER dismantle or customize pack circuitry in any way or leak cells
NEVER restaurant on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a amazing addition to the thing presently being discussed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Battery charger Adapter.

FEATURES:
Links a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

INCLUDES:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This thing compliments the main item right here.



This is the Hitec X4 Plus AC/DC Powered Multi Battery charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Fast Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Instantly manages existing rate throughout charging and discharging
    procedure
Four independent 50-watt power outputs charges up to four batteries
    at the same time
Four independent balancing ports for lithium batteries
Five user customizable presets per output
Twin fan cooling system with internal sensor for managing fan
    speed
Batteries can be set to immediately Charge/Discharge or Discharge/
    Charge up to an optimum of 5 cycles
Automatic charge termination* if battery temperature level gets expensive
    *Temperature level probe (HRCP4159) is required and need to be purchased
    separately
PC-based program can analyze the characteristics of each battery via
    a USB port*, chart of voltage, existing and capacity curves with
    individual voltage of each cell in a lithium pack can be displayed
    on a PC- *PC-LINK USB adaptor is required and need to be purchased
    separately, HRCP4168

INCLUDES:
Hitec X4 Plus AC/DC Powered Multi Battery charger with Air Conditioning and DC Input Cables
    Battery Clamps, Tamiya Charge Connector, RX Battery Charge
    Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards 2 Bare
    Wire Connectors, Alligator Clip Charging Connector and Manual

SPECS:
Input Voltage: Air Conditioning, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Measurements: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)