Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

CONSISTS OF:
Balance board
Balance lead

NEEDS:
Connecting between battery charger and batteries

Lots of others have bought this product in addition to the product that you are presently checking out.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Connects a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Port

Get this product to improve the one you read about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Star Plug
Star plug works with the R/C market's most frequently used
    polarized power plug, tapered shape and grip strips for quick and
    easy connection and separation

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capability: 5000mAh
Discharge Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Port: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER disassemble or customize pack wiring in any way or puncture cells
NEVER location on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a fantastic enhancement to the product presently being discussed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Connects a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

CONSISTS OF:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This product compliments the main item here.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Automatically manages existing rate throughout charging and releasing
    procedure
Four independent 50-watt power outputs charges up to four batteries
    at once
Four independent balancing ports for lithium batteries
Five user adjustable presets per output
Twin fan cooling system with internal sensing unit for controlling fan
    speed
Batteries can be set to immediately Charge/Discharge or Discharge/
    Charge up to a maximum of 5 cycles
Automatic charge termination* if battery temperature level gets expensive
    *Temperature level probe (HRCP4159) is needed and need to be bought
    independently
PC-based program can evaluate the qualities of each battery by means of
    a USB port*, chart of voltage, existing and capability curves with
    individual voltage of each cell in a lithium pack can be shown
    on a PC- *PC-LINK USB adaptor is needed and need to be bought
    independently, HRCP4168

CONSISTS OF:
Hitec X4 Plus AC/DC Powered Multi Charger with Air Conditioning and DC Input Cables
    Battery Clamps, Tamiya Charge Port, RX Battery Charge
    Port, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Ports, Alligator Clip Charging Connector and Manual

SPECIFICATIONS:
Input Voltage: Air Conditioning, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, total 200W)
Discharging Current: 0.1-1.0A (max 5W x4, total 20W)
Dimensions: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)