Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

CONSISTS OF:
Balance board
Balance lead

REQUIRES:
Connecting in between battery charger and batteries

Numerous others have purchased this item together with the item that you are currently reviewing.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Connects a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Port

Get this item to boost the one you read about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Star Plug
Star plug works with the R/C market's most frequently utilized
    polarized power plug, tapered shape and grip strips for fast and
    simple connection and separation

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capability: 5000mAh
Release Score: 25C continuous
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Port: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER disassemble or customize pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a wonderful addition to the item currently being reviewed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Connects a battery with an EC3 male plug to a charger with 4mm
    input jacks
14 AWG wire

CONSISTS OF:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This item praises the main item right here.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Quick Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Immediately manages present rate during charging and releasing
    process
4 independent 50-watt power outputs charges up to 4 batteries
    simultaneously
4 independent balancing ports for lithium batteries
Five user personalized presets per output
Twin fan cooling system with internal sensing unit for controlling fan
    speed
Batteries can be set to instantly Charge/Release or Discharge/
    Charge up to a maximum of 5 cycles
Automatic charge termination* if battery temperature gets too high
    *Temperature level probe (HRCP4159) is required and must be purchased
    individually
PC-based program can evaluate the characteristics of each battery via
    a USB port*, graph of voltage, present and capability curves with
    individual voltage of each cell in a lithium pack can be displayed
    on a PC- *PC-LINK USB adaptor is required and must be purchased
    individually, HRCP4168

CONSISTS OF:
Hitec X4 Plus AC/DC Powered Multi Charger with A/C and DC Input Cables
    Battery Clamps, Tamiya Charge Port, RX Battery Charge
    Port, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Ports, Alligator Clip Charging Connector and Manual

SPECS:
Input Voltage: A/C, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Present: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Measurements: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)