Hitec Xh Battery Balancer Adapter For X4 Charger

This is the XH Balance Board for the Hitec X4 Quad Multi Charger.

FEATURES:
Balance lead and ports for 2-6S LiPo battery loads

INCLUDES:
Balance board
Balance lead

NEEDS:
Linking in between battery charger and batteries

Lots of others have purchased this thing in addition to the thing that you are currently reading about.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a battery charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Adapter

Get this thing to improve the one you are reading about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Star Plug
Star plug is compatible with the R/C market's most commonly used
    polarized power plug, tapered shape and grip strips for fast and
    simple connection and separation

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Rated Capacity: 5000mAh
Release Score: 25C continuous
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Balancing Adapter: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER disassemble or customize pack electrical wiring in any way or puncture cells
NEVER location on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This is a superb enhancement to the thing currently being discussed.

Venom Power Charger Lead w/EC3

This is the Venom EC3 Male to Charger Adapter.

FEATURES:
Links a battery with an EC3 male plug to a battery charger with 4mm
    input jacks
14 AWG wire

INCLUDES:
11.75" (298mm) wire lead with 4mm banana plugs and EC3

This thing compliments the main item below.



This is the Hitec X4 Plus AC/DC Powered Multi Charger, Discharger and Balancer.

FEATURES:
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
    and 2-20V lead acid batteries
Fast Charge, Balance Charge and Storage Charge modes for lithium
    batteries
Immediately manages existing rate during charging and discharging
    process
4 independent 50-watt power outputs charges up to four batteries
    at the same time
4 independent balancing ports for lithium batteries
5 user adjustable presets per output
Twin fan cooling system with internal sensing unit for controlling fan
    speed
Batteries can be set to automatically Charge/Release or Discharge/
    Charge up to a maximum of 5 cycles
Automatic charge termination* if battery temperature gets expensive
    *Temperature level probe (HRCP4159) is required and must be acquired
    individually
PC-based program can analyze the qualities of each battery by means of
    a USB port*, chart of voltage, existing and capability curves with
    individual voltage of each cell in a lithium pack can be shown
    on a PC- *PC-LINK USB adaptor is required and must be acquired
    individually, HRCP4168

INCLUDES:
Hitec X4 Plus AC/DC Powered Multi Charger with Air Conditioner and DC Input Cables
    Battery Clamps, Tamiya Charge Adapter, RX Battery Charge
    Adapter, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare
    Wire Adapters, Alligator Clip Charging Connector and Manual

SPECIFICATIONS:
Input Voltage: Air Conditioner, 100-120V (330-380W)
DC, 11-18V (minimum 20A)
Charging Current: 0.1-6.0A (max 50W x 4, overall 200W)
Discharging Current: 0.1-1.0A (max 5W x4, overall 20W)
Measurements: 8.8 x 6.7 x 2.6" (225 x 170 x 66mm)
Weight: 3.5pounds (1.57kg)