Great Planes Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum construction

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Installation on Rimfire 28mm Motor

Below is a excellent thing that lots of others have actually bought at the exact same time.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with accessories)

This thing compliments the above talked about thing.

930Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1800Kv
Max. effectiveness present: 6-10 Amp
NoLoad current / 10 V: 0.8 Amp
Existing capability: 16 A/60 s
Max. Performance: 74%
Shaft size: 3mm

A2208-12 much like: AXI 2208/20, E-Flite Park 370

This thing compliments the main item below.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adjuster rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

NEEDS:
Assembly onto motor or gear drive system in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.25"

REMARKS:
Usage Speed 400 Electric motors.

Below is a excellent thing that lots of others have actually bought at the exact same time.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction reduces turning mass for
    greater output and longer life.
Reinforcing carbon fibers help maintain real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring guideline sheet

NEEDS:
ALL props need balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

REMARKS:
Slo-Flyer props are Not created for Glow engines

Below is an additional thing that compliments the thing being talked about.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For use on electrical powered aircraft only (not for radiance engines).

FEATURES:
Gray composite construction
Comes with 2 adjuster rings that adapt to different motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props need balancing, this is REALLY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 6
Hub inner size: 0.25" (6.3mm)