Great Planes Giant Super Sportster ARF

This is the radio managed, radiance or fuel powered, almost-ready-to-fly,
Great Planes Giant Super Sportster Sport Airplane.
For Intermediate to Advanced Modeler/Fliers 14 years of age and older.
IMAA Legal

FUNCTIONS:
Building: Balsa and plywood
Wings: Two-piece, wing halves connect with an aluminum joiner tube
    and secure to the fuselage with 1/4-20 nylon bolts
Covering: Factory applied Leading Flite MonoKote, see REMARKS
Radio Compartment: Plywood enhanced
Servo Positioning: Servos for all control surface areas mount externally
    with direct 4-40 linkages increasing control action and
    simplifying installation and set-up
Cowling: Pre-painted fiberglass
Wheel Pants: Pre-painted fiberglass
Canopy: Clear with painted-on structure detail
Landing Equipment: 3/16" (5mm) diameter, with steerable .10" (2.5mm)
    diameter tailwheel assembly
Wheels: Foam, 2 primary 3.5" (87mm) diameter, 1" (25.4mm) tailwheel
Aileron Control: Double servo
Fuel Tank: 14.2oz (420cc) for usage with radiance fuel, if utilizing fuel
    engine see REMARKS
Decals: "Giant Super Sportster" in Red with Monochrome lays out
    Black cockpit console with White markings
Engine Mount: 2 piece, composite building and construction with hardware to
    mount radiance or fuel engine with four aluminum Fuji Imvac 32
    engine spacers, if utilizing a various fuel engine various
    hardware might be required
Structure Time: Ready to fly in just 15-20 hours.
Spinner: 3¼" (83mm) diameter, aluminum
Warranty: Great Planes Model Production Company ensures this
    kit free from flaws in both materials and craftsmanship at date
    date of purchase.

INCLUDES:
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
    pre-bent 3/16" (5mm) primary landing equipment, decals
    3.5" (87mm) primary wheels, 1" (25.4mm) tailwheel, adjustable engine
    mount 14.2oz (420cc) fuel tank, wood servo trays and wing joiners,
    Great Planes hardware plan and photo-illustrated instructions

REQUIRES:
Engine: 1.60 - 2.00 cu in (26 - 33 cc) 2-stroke
1.20 - 2.00 cu in (20- 33 cc) 4-stroke
2.00 cu in (32cc) fuel
Muffler: On O.S. Max 1.60 2-stroke the basic muffler will work
Ignition Change: GPMG2150, if utilizing fuel engine
Radio: 4 - 5 Channel
Servos: 7 overall, 5 ball bearing (2-Elevator, 2-Ailerons, 1-Rudder)
1 basic torque servo for throttle
1 basic torque servo for kill switch if utilizing fuel
engine
One 6" (150mm) Servo Extension: For receiver to aileron connection
3 24" (610mm) Servo Extensions: 2 elevators, 1 rudder
2 12" (300mm) Servo Extensions: For ailerons
2 Double Servo Extensions: For aileron and elevator servos
Receiver Battery: Minimum 1000mAh
Misc. Items: Shine plug, ¼" foam rubber padding, medium fuel tubing,
    fuel filter, propeller, building and field equipment.

SPECS:
Wingspan: 82" (2085mm)
Wing Location: 1293 sq in (83.4 sq dm)
Weight: 13 - 14.5pound (5850 - 6575kg)
Wing Loading: 23 - 25oz/sq feet (70 - 79g/sq dm)
Length: 72" (1820mm)
Airfoil: Completely symmetrical, low wing positioning
Center of Gravity: 5¼" (133mm) Back from the flat part of the
    leading edge of the wing at the middle
Control Tosses- High Rate Low Rate
    Elevator: Up & Down 1½" (38mm) 1" (25.4mm)
    Rudder: Right to Left 3" (76mm) 2" (51mm)
    Ailerons: Up & Down 1¼" (32mm) ¾" (19mm)

REMARKS:
Following are colors and stock varieties of the Leading Flite MonoKote
    utilized to cover this design:
White TOPQ0204
Black TOPQ0208
Real Red TOPQ0227

If a replacement fuel tank is required, buy the Sullivan 14oz
    Flextank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
    Some small cutting and adjustments might be required.

If utilizing fuel engine, fuel tank stopper and fuel line need to be
    changed, the following products are required;
Sullivan #484 Gasoline Conversion Kit (SULQ2684)
2 Du-Bro #813 Fuel Line Barbs (DUBQ0670)
Nylon Ties (ASCC3720)
Gasoline Fuel Tubing (GPMQ4135)

Pilot revealed inside the aircraft is not included.

The Inner and Outer Fuel Line Collars (1 radiance and 1 fuel) and
    the 2 Fuel Line Plugs noted in the manual are not
    included.