Gens Ace 400mAh 2S 7.4V 35C Lipo b

Here is a excellent thing that numerous others have actually bought at the exact same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Secret Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Realistic narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Realistic driver figure and lots of other scale information
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and durability
• Rugged steel C-channel frame rails with bracing keep whatever stiff and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated tank and durable plastic suspension links provide tested Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and develop greater ground clearance. Worm equipment drive also supplies a low equipment ratio to minimize torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, outdoor camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to deal with hard climbs up and rough routes. Like the larger SCX10™ chassis, this smaller version uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charm on the routes. Check out that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding much more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action remains in package: put together and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep whatever undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor supplies the correct amount of torque to assist rise steep climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists safeguard the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and develop greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running throughout hard climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you have actually understood and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic strong axle design. For optimal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are included and are installed in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the back which is optimized to minimize axle steer and torque twist. We have actually also included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale information, in spite of the small scale.
The formally certified Nitto Path Grappler M/T Tires provide a wonderful blend of off-road performance while still retaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board parts. You can quickly reach the battery and chassis by getting rid of just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not indicate the features require to do the same. No bushings discovered here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering precision, while also supplying protection for the servo equipments in the event of a bind or effect.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Battery charger: USB LiPo battery charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No