Gens Ace 400mAh 2S 7.4V 35C Lipo b

Here is a terrific product that numerous others have purchased the exact same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Secret Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with reasonable light bar
• Reasonable driver figure and numerous other scale information
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep whatever rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links provide tested Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also offers a low gear ratio to lower torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to deal with difficult climbs and rough tracks. Like the larger SCX10™ chassis, this smaller variation uses lots of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that decreases torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charisma on the tracks. Take a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding much more to its newbie appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Whatever needed for action is in the box: put together and completed lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and durable steel c-channel frame rails with bracing to keep whatever intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to help ascend high climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running during difficult climbs and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and resilient plastic suspension links provides the crawling efficiency you've understood and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link design for the back which is enhanced to lower axle steer and torque twist. We've also consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are legendary in the off-road world. They are formed in black and feature sensational scale information, in spite of the small scale.
The formally licensed Nitto Trail Grappler M/T Tires provide a fantastic blend of off-road efficiency while still maintaining exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers simple access to on-board parts. You can rapidly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't suggest the features need to do the same. No bushings discovered here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering accuracy, while also offering protection for the servo gears in case of a bind or impact.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No