Gens Ace 400mAh 2S 7.4V 35C Lipo b

Below is a great product that many others have purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Realistic narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Realistic driver figure and lots of other scale details
• Officially licensed KMC XD229 Machete Crawl wheels
• Officially licensed Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and resilience
• Rugged steel C-channel frame rails with bracing keep whatever stiff and lined up
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and produce greater ground clearance. Worm equipment drive likewise offers a low equipment ratio to lower torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to bring on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to take on tough climbs up and rough routes. Like the larger SCX10™ chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links delivers Axial-worthy crawling performance even at this little scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that reduces torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays proficiency and charisma on the routes. Have a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding much more to its beginner appeal, the SCX24 Deadbolt comes 100% total and ready to run. Everything required for action remains in the box: put together and completed lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep whatever undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the correct amount of torque to help ascend high climbs up. It's mated to a steel motor install to keep flex to a minimum, which assists secure the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and produce greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and resilience to keep things running throughout tough climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated tanks and long lasting plastic suspension links delivers the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle design. For optimal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the back which is optimized to lower axle steer and torque twist. We have actually likewise consisted of additional suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature sensational scale details, despite the little scale.
The formally certified Nitto Trail Grappler M/T Tires provide a wonderful mix of off-road performance while still retaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board components. You can rapidly reach the battery and chassis by removing simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not suggest the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while likewise providing security for the servo equipments in case of a bind or impact.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No