Gens Ace 400mAh 2S 7.4V 35C Lipo b

Below is a great product that several others have actually bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Secret Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Sensible narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Sensible driver figure and numerous other scale information
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and toughness
• Rugged steel C-channel frame rails with bracing keep whatever rigid and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links provide tested Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and produce greater ground clearance. Worm equipment drive likewise provides a low equipment ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to take on tough climbs up and rough routes. Like the larger SCX10™ chassis, this smaller sized version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trustworthy handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links delivers Axial-worthy crawling performance even at this little scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the routes. Check out that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding even more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever needed for action remains in the box: put together and completed lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep whatever undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the correct amount of torque to assist ascend high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists protect the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and produce greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and toughness to keep things running throughout tough climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated tanks and long lasting plastic suspension links delivers the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, formed plastic strong axle style. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is optimized to minimize axle steer and torque twist. We have actually likewise consisted of additional suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature sensational scale information, despite the little scale.
The officially licensed Nitto Trail Grappler M/T Tires provide a wonderful mix of off-road performance while still maintaining exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board components. You can quickly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size doesn't imply the features need to follow suit. No bushings discovered here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the whole lorry.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding precision, while likewise providing security for the servo gears in case of a bind or effect.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No