Gens Ace 400mAh 2S 7.4V 35C Lipo b

Here is a great item that numerous others have bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Sensible narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Sensible motorist figure and numerous other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links deliver tested Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and produce higher ground clearance. Worm gear drive also supplies a low gear ratio to lower torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with difficult climbs up and rough routes. Like the larger SCX10™ chassis, this smaller version uses lots of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most trustworthy handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that minimizes torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays skills and charisma on the routes. Have a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable motorist figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% total and all set to run. Everything required for action remains in the box: put together and ended up car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor supplies the right amount of torque to assist rise steep climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and produce higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and sturdiness to keep things running during difficult climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated tanks and long lasting plastic suspension links provides the crawling efficiency you've known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are consisted of and are mounted in the front bumper. An additional LED light port on the ESC enables you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the back which is enhanced to lower axle steer and torque twist. We've also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are legendary in the off-road world. They are formed in black and function sensational scale details, despite the small scale.
The officially accredited Nitto Path Grappler M/T Tires offer a great mix of off-road efficiency while still retaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board parts. You can rapidly reach the battery and chassis by eliminating simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't indicate the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire car.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also providing defense for the servo gears in case of a bind or effect.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No