Gens Ace 400mAh 2S 7.4V 35C Lipo b

Below is a wonderful thing that numerous others have actually bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with practical light bar
• Practical chauffeur figure and lots of other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep whatever rigid and aligned
• Front and rear axles include a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links provide proven Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and develop greater ground clearance. Worm gear drive likewise offers a low gear ratio to minimize torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to tackle tough climbs and rough tracks. Like the bigger SCX10™ chassis, this smaller variation uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the tracks. Take a look at that Deadbolt body — with its narrow position, bulging hood, practical chauffeur figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding a lot more to its beginner appeal, the SCX24 Deadbolt comes 100% total and all set to run. Whatever needed for action is in the box: put together and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep whatever undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to assist rise steep climbs. It's mated to a steel motor install to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and durability to keep things running throughout tough climbs and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling performance you've known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle style. For ideal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are included and are installed in the front bumper. An extra LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link style for the rear which is enhanced to minimize axle steer and torque twist. We've likewise included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and function sensational scale details, in spite of the small scale.
The formally certified Nitto Path Grappler M/T Tires offer a great mix of off-road performance while still retaining exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board parts. You can rapidly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not imply the functions require to do the same. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while likewise offering security for the servo gears in the event of a bind or impact.
 

Requirements

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No