Gens Ace 400mAh 2S 7.4V 35C Lipo b

Here is a wonderful thing that numerous others have purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Secret Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Sensible narrow-stance rock spider body in olive green or red
• Molded roll cage with practical light bar
• Sensible motorist figure and lots of other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles include a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated tank and durable plastic suspension links deliver tested Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and create greater ground clearance. Worm gear drive likewise provides a low gear ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to take on hard climbs up and rough tracks. Like the larger SCX10™ chassis, this smaller variation uses lots of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling efficiency even at this little scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that minimizes torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charm on the tracks. Take a look at that Deadbolt body — with its narrow stance, bulging hood, practical motorist figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and prepared to run. Everything required for action is in package: assembled and completed vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh two 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the right amount of torque to help ascend high climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps protect the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and sturdiness to keep things running throughout hard climbs up and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated tanks and durable plastic suspension links delivers the crawling efficiency you've understood and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, molded plastic solid axle style. For ideal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the rear which is optimized to minimize axle guide and torque twist. We've likewise included additional suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature sensational scale details, in spite of the little scale.
The formally accredited Nitto Trail Grappler M/T Tires use a wonderful mix of off-road efficiency while still retaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board parts. You can quickly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't indicate the functions require to follow suit. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the entire vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for guiding accuracy, while likewise supplying defense for the servo equipments in the event of a bind or impact.
 

Requirements

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No