FMS F35 PNP V2 64mm Fan

Overview


Features

280mm fiber pipeline inserted through the fuselage and primary wing
Usage of 4 inner-hexagon screws rather of glue enhances primary wing set and landing equipment setup enhancing strength of structure
Improved primary wing set and landing equipment setup. This enhances strength of structure and reduces assembly time
More powerful 64mm 11-blade ducted fan with approximately 800 grams of thrust
2840-KV3900 motor
Five 9g servos
Predator 40A ESC
FMS EPO foam material creates more powerful, more impact-resistant aircrafts
Eco-friendly water-based paint minimizes blistering from sun
Pre-installed, recently designed control horns permits more toss

Had to Total

Exactly what remains in package?

4+ Channel Radio System
LiPo Battery and Battery charger

(1) F-35 V2 64mm
(1) User Handbook

Overview

Influenced by the superior features of the initial design, version two (V2) of the FMS F-35 64mm has improved mechanical and structural features that will improve air efficiency and decrease assembly time.
A fiber pipeline greatly boosts the wing strength for improved flying maneuvers. An improved primary wing set and landing equipment setup enhances strength of structure and reduces assembly time.
Plus, the current 64mm ducted fan can attain more than 800 grams of thrust.
The differences in speeds in between the V1 and V2 will be noticeable. If you have actually got the “requirement for speed,” devices such as rockets can be eliminated to produce a much faster, more structured design.







Specifications


Wingspan: 27.5 in (698mm)
Total Length: 37.8 in (960mm)
Flying Weight: Roughly 32.5 oz (920g)
Motor Size: Brushless 2840-KV3900 with 64mm Fan System
Servos: 9G Servo - (5)
CG (center of gravity): 3.6 - 3.8 in (93-98mm) From Leading Edge
Speed Control : 40A
Recommended Battery: Li-Po 11.1V 2200mAh 35C
Aileron: Yes
Elevator: Yes
Rudder: Yes
Throttle: Yes
Flaps: No
Pulls back: No
Assembly Time: Less than 1 Hour