Flyzone Tail Set Micro Super Cub

This is the Tail Set for the Micro Super Cub from Flyzone.

FEATURES:
Foam building with prehinged rudder and elevator

INCLUDES:
Horizontal and Vertical Stabilizer for the Micro Super Cub

NEEDS:
Attaching to fuselage

Often acquired with the item that you are currently reading about.



This is the Wing Set for the Micro Super Cub from Flyzone.

FEATURES:
One-piece foam building

INCLUDES:
Wing for the Micro Super Cub from Flyzone

NEEDS:
Attaching to fuselage

Want one more great item to enhance the above mentioned item?



This is the Fuselage for the Flyzone Micro Super Cub.

FEATURES:
Two piece foam building

INCLUDES:
Fuselage for the Flyzone Micro Super Cub

NEEDS:
Setting up all elements into and on fuselage

Want one more great item to enhance the above mentioned item?



This is the Landing Equipment for the Micro Super Cub from Flyzone.

FEATURES:
Changes damaged landing gear

INCLUDES:
Two 0.67" (17mm) Foam Main Wheels, 0.39" (10mm) Tailwheel, prebent
    Main and Tail Landing Equipment Wire, 3 plastic Wheel Anchors

Below is a great item that lots of others have actually purchased the exact same time.



    This is the Fantastic Planes Pro CA activator with a pump.
Compatible with a lot of foams.

For thick and medium CA that does not cure as quickly as the instant. All you have
to do is apply the CA then spray the Activator on the CA and it cures nearly
immediately. Another method is to first apply the activator to a piece of balsa
you want to sign up with to another piece, then include CA to the other piece.
When you put them together, you have an instant glue joint. The pump makes life
that a lot easier, simply hold the bottle 4-6" far from specialty you are spraying
and pump one or two times and it's done.

INCLUDES:
One 2oz bottle of Activator
One pump

COMMENTS:
CARE, Always spray on a test area initially, and ALWAYS use safety
    glasses.