E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) design that ended up being an instant best-seller when it was launched in 2005. It was readily available for more than a years and is still renowned to this day because it fit as quickly and in as little time as foam PNP designs, yet used the advantages of light-weight, stiff, and strong wood construction that delivered flight performance unlike comparable class fully-molded EPS and EPO foam designs. The Ultra Stick 1.1m is an updated and updated version that is a little bigger to provide even better flight performance with very popular and common 3S or 4S 2200–3200mAh batteries. It's readily available in an ARF version that bolts together and is all set for setup of your favored power system and electronic devices, or in a BNF Fundamental version that's equipped with four factory-installed servos, a Spektrum Bird Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both variations are all set to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, in addition to optional wheel pants to look even more like the bigger Hangar 9 Ultra Stick designs the design is based on. That design provides excellent low-speed attributes for easier landings, incredible high-speed handling, and outstanding aerobatic capabilities that intermediate to knowledgeable pilots will value and enjoy!





Features

Inspired by the renowned Mini Ultra Stick with modern-day technologies, functions, and performance for "moderate to wild" capabilities

A fantastic first-ever "wood," daily sport flying and aerobatic capable design for a broad range of pilots

Specifically tuned brushless motor compatible with 3S and 4S batteries without the need for modifications

Popular and cost effective 2200–3200mAh batteries deliver a wide variety of performance and flight times

45-amp Spektrum™ Bird™ Smart Lite ESC offers real-time battery voltage, present, and other data through compatible receivers and transmitters

Optional-use motor reversing for special ground handling and other capabilities

Suitable with the Spektrum™ DXS transmitter consisted of with lots of RTF fitness instructor designs

Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® technology

Easier to fly with innovative and optional-use SAFE® Select flight envelope security

The unequaled stability and locked-in feel of special AS3X® technology

4 resilient, factory-installed metal-geared servos and linkages

Bigger control surface areas for added control and sport to moderate 3D aerobatic capabilities

The option to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and simple to install/remove with a single thumbscrew

Steerable tailwheel plus big tires for the capability to remove from/land on a variety of surface areas, including yard

Strong and stiff – yet light-weight and lasting – built-up wood construction

Fast and simple bolt-together assembly – no glue, tape, or special tools required





Overview
The E-flite Ultra Stick 1.1m is based on the design of bigger Hangar 9 Ultra Stick designs and was motivated by the renowned Mini Ultra Stick. In 2005 the Mini Ultra Stick ended up being an all-time top-seller as E-flite's first-ever "wood" PNP and ARF design that bolted together so it might be assembled as quickly and in as little time as foam PNP designs. It likewise used the benefits that strong, stiff and light-weight, built-up wood construction used – which delivered flight performance unlike molded foam designs. The Ultra Stick 1.1m is an updated, updated, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet features stiffer tail surface areas – that set up rapidly and quickly with just two locknuts – and a more powerful installing area for the primary gear set up with four bolts. The one-piece wing is simple to set up and eliminate thanks to the single thumbscrew, plus it's set up to accept two additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Fundamental version is equipped with four factory-installed metal-geared servos, a 3S and 4S compatible Spektrum motor, and an unique Bird 45-amp Smart Lite ESC that can supply a variety of real-time power system telemetry data with Smart and non-Smart batteries through compatible Spektrum AirWare™ equipped transmitters. It's likewise equipped with an AR631 receiver to supply fly-by range and real-time telemetry data, including battery voltage, present, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X® and optional-use SAFE® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is all set for setup of your favored electronic devices and power system! And because it's based on the design of bigger Hangar 9 Ultra Stick designs, it provides the exact same excellent low-speed flight attributes that make for easier landings, along with excellent high-speed handling and outstanding fundamental to moderate 3D aerobatic capabilities. You can even set up the optional wheel pants (offered separately) to make it look more like bigger Ultra Stick designs! This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable design for a wide variety of pilots.





 





 







Bind-N-Fly Completion Level Advantage
Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) airplane make entering the air rapidly and with the very best control experience possible easier than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver set up, so all you need to do is bind the receiver to a suitable transmitter, complete any final assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is equipped with an unique Spektrum™ Bird™ Smart Lite ESC that can supply a range of real-time power system-related telemetry data, including motor RPM, present, battery voltage, and more – with Smart and non-Smart batteries – through compatible receivers (including the AR631) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is equipped with special Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to ravel the results of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much bigger aircraft. Optional-use SAFE Select provides pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch to make it easier to remove, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is 3S and 4S compatible, providing a wide variety of "moderate to wild" performance – from sport flying and fundamental aerobatics with 3S batteries to hovering and endless vertical performance with 4S batteries! The hassle-free top-mounted and magnetically protected hatch cover makes installing and removing common and popular 2200–3200mAh batteries simple.
 






Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, providing a flying experience you can't get with molded foam designs! Best of all, it gets here mainly factory-assembled, and the BNF Fundamental version likewise consists of resilient, factory-installed metal-geared servos and linkages. And in the unfortunate occasion you harm any airframe parts or parts and can't repair them, a full line of replacement/spare parts is readily offered.
 



Uniquely Capable
The renowned Mini Ultra Stick motivated the Ultra Stick 1.1m. And because it's based on the design of bigger Hangar 9 Ultra Stick designs, it provides the exact same excellent low-speed flight attributes that make for easier landings, along with excellent high-speed handling and remarkable fundamental to moderate 3D aerobatic capabilities. This makes it an ideal first-ever "wood," daily sport flying and aerobatic capable design for a wide variety of pilots. Plus, it's set up to accept two additional servos so you can divide the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Fundamental version Ultra Stick 1.1m gets here mainly factory-assembled with the power system, servos, and receiver set up. The ARF version is likewise mainly factory-assembled, so all you need to do is complete some fast and simple final bolt-together assembly – without glue, tape, or special tools – and you'll be all set to fly in less time compared to nearly all other wood designs!
 






 





Requirements

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Battery charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Port Type: IC3

Flaps: Optional

LiPo Compatibility: THREE, 4S

Material: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Product Length: 39.1" (993 mm)

Product Weight: 31.7oz (898g) without Battery

Prop Size: 10 x 5E

Radio: Sold Separately

Receiver: Included

Recommended Motor Battery: THREE 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Port

Servos: Included

Ability Level: Level 2

Speed Control: Included

Spinner Size: 2" (51 mm)

Innovation : Smart, AS3X and SAFE

Trim Plan Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)