E-Flite Ultra Stick 1.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) design that became an instantaneous best-seller when it was released in 2005. It was available for more than a decade and is still renowned to this day due to the fact that it fit as easily and in as little time as foam PNP designs, yet used the advantages of light-weight, stiff, and strong wood construction that delivered flight efficiency unlike comparable class fully-molded EPS and EPO foam designs. The Ultra Stick 1.1m is an updated and upgraded variation that is somewhat bigger to provide even much better flight efficiency with exceptionally popular and common 3S or 4S 2200–3200mAh batteries. It's available in an ARF variation that bolts together and is all set for setup of your favored power system and electronic devices, or in a BNF Basic variation that's geared up with four factory-installed servos, a Spektrum Bird Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select innovations. Both variations are all set to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, in addition to optional wheel trousers to look even more like the bigger Hangar 9 Ultra Stick designs the design is based upon. That design offers outstanding low-speed attributes for easier landings, amazing high-speed handling, and remarkable aerobatic abilities that intermediate to knowledgeable pilots will value and enjoy!





Features

Inspired by the renowned Mini Ultra Stick to modern-day innovations, features, and efficiency for "mild to wild" abilities

A terrific first-ever "wood," everyday sport flying and aerobatic capable design for a large range of pilots

Specifically tuned brushless motor suitable with 3S and 4S batteries without the need for adjustments

Popular and economical 2200–3200mAh batteries provide a wide variety of efficiency and flight times

45-amp Spektrum™ Bird™ Smart Lite ESC supplies real-time battery voltage, current, and other data via suitable receivers and transmitters

Optional-use motor reversing for unique ground handling and other abilities

Compatible with the Spektrum™ DXS transmitter consisted of with many RTF trainer designs

Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® innovation

Much easier to fly with ingenious and optional-use SAFE® Select flight envelope defense

The unmatched stability and locked-in feel of exclusive AS3X® innovation

Four long lasting, factory-installed metal-geared servos and linkages

Larger control surfaces for included control and sport to mild 3D aerobatic abilities

The option to include two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons

One-piece wing with a fully-symmetrical airfoil that's quick and simple to install/remove with a single thumbscrew

Steerable tailwheel plus big tires for the capability to take off from/land on a variety of surfaces, including turf

Strong and stiff – yet light-weight and lasting – built-up wood construction

Quick and simple bolt-together assembly – no glue, tape, or unique tools required





Overview
The E-flite Ultra Stick 1.1m is based upon the design of bigger Hangar 9 Ultra Stick designs and was inspired by the renowned Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF design that bolted together so it might be assembled as easily and in as little time as foam PNP designs. It also used the advantages that strong, stiff and light-weight, built-up wood construction used – which delivered flight efficiency unlike molded foam designs. The Ultra Stick 1.1m is an updated, upgraded, and more fine-tuned variation of the Mini Ultra Stick. The balsa and lite-ply airframe is still light-weight yet features stiffer tail surfaces – that set up rapidly and easily with simply two locknuts – and a more powerful mounting location for the primary gear set up with four bolts. The one-piece wing is simple to set up and eliminate thanks to the single thumbscrew, plus it's established to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Basic variation is geared up with four factory-installed metal-geared servos, a three and 4S suitable Spektrum motor, and a special Bird 45-amp Smart Lite ESC that can offer a variety of real-time power system telemetry data with Smart and non-Smart batteries via suitable Spektrum AirWare™ geared up transmitters. It's also geared up with an AR631 receiver to offer fly-by range and real-time telemetry data, including battery voltage, current, ESC temps, and more — plus motor reversing for unique ground handling and other abilities — in addition to the advantages of AS3X® and optional-use SAFE® Select innovations. Or, the ARF (Almost-Ready-To-Fly) variation is all set for setup of your favored electronic devices and power system! And due to the fact that it's based upon the design of bigger Hangar 9 Ultra Stick designs, it offers the exact same fantastic low-speed flight attributes that produce easier landings, in addition to outstanding high-speed handling and impressive standard to mild 3D aerobatic abilities. You can even set up the optional wheel trousers (offered independently) to make it look more like bigger Ultra Stick designs! This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots.





 





 







Bind-N-Fly Completion Level Benefit
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) airplane make entering into the air rapidly and with the best control experience possible easier than ever. They come out of package with the power system, servos, and a Spektrum 2.4GHz receiver set up, so all you require to do is bind the receiver to a suitable transmitter, finish any last assembly, and fly!
 



Smart Technology
The Ultra Stick 1.1m is geared up with a special Spektrum™ Bird™ Smart Lite ESC that can offer a range of real-time power system-related telemetry data, including motor RPM, current, battery voltage, and more – with Smart and non-Smart batteries – via suitable receivers (including the AR631) and Spektrum AirWare™ geared up transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.
 






Exclusive Technologies
This Ultra Stick is geared up with exclusive Spektrum™ AS3X® and SAFE® Select innovations. AS3X works behind the scenes to smooth out the effects of wind and turbulence to provide a locked-in feel that makes it appear like you're flying a much bigger plane. Optional-use SAFE Select offers pitch and bank angle limitations in addition to automated self-leveling that can be switched on and off at the flip of a switch to make it easier to take off, fly and land!
 



Flexible Power
The factory-installed brushless outrunner motor is 3S and 4S suitable, using a wide variety of "mild to wild" efficiency – from sport flying and standard aerobatics with 3S batteries to hovering and unrestricted vertical efficiency with 4S batteries! The practical top-mounted and magnetically protected hatch cover makes installing and eliminating common and popular 2200–3200mAh batteries simple.
 






Wood Airframe
The balsa and lite-ply airframe is light-weight yet stiff and strong, using a flying experience you can't get with molded foam designs! Best of all, it gets here mainly factory-assembled, and the BNF Basic variation also consists of long lasting, factory-installed metal-geared servos and linkages. And in the regrettable event you damage any airframe parts or components and can't fix them, a complete line of replacement/spare parts is easily available.
 



Uniquely Capable
The renowned Mini Ultra Stick inspired the Ultra Stick 1.1m. And due to the fact that it's based upon the design of bigger Hangar 9 Ultra Stick designs, it offers the exact same outstanding low-speed flight attributes that produce easier landings, in addition to outstanding high-speed handling and fantastic standard to mild 3D aerobatic abilities. This makes it a best first-ever "wood," everyday sport flying and aerobatic capable design for a wide variety of pilots. Plus, it's established to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!
 






Easy Assembly
The BNF Basic variation Ultra Stick 1.1m gets here mainly factory-assembled with the power system, servos, and receiver set up. The ARF variation is also mainly factory-assembled, so all you require to do is finish some fast and simple last bolt-together assembly – without glue, tape, or unique tools – and you'll be all set to fly in less time compared to almost all other wood designs!
 






 





Requirements

Approximate Assembly Time: 1-3 Hours

Battery: Sold Separately

Charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Connector Type: IC3

Flaps: Optional

LiPo Compatibility: THREE, 4S

Material: Wood

Minimum Required Radio: Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter

Motor Size: 3534-1000KV

Motor Type: Brushless

Power Type: Electric

Item Length: 39.1" (993 mm)

Item Weight: 31.7oz (898g) without Battery

Propeller Size: 10 x 5E

Radio: Sold Separately

Receiver: Consisted of

Recommended Motor Battery: THREE 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Connector

Servos: Consisted of

Skill Level: Level 2

Speed Control: Consisted Of

Spinner Size: 2" (51 mm)

Technology : Smart, AS3X and SAFE

Trim Plan Colors: Red, White, Black

Wingspan: 43.31" (1100 mm)