E-Flite Spinner: Apprentice

Features



Includes spinner cone and backplate













Below is a fantastic product that many others have actually purchased the exact same time.

Motor Mount: Apprentice


Features



Includes motor mount, motor screws and washers













You will certainly love this item if you have the item earlier mentioned.

Cowl: Apprentice


Features



Includes cowl, screws and decals













This product is frequently bought with the above pointed out product.

11 x 8 Electric Prop




Want an additional fantastic product to enhance the above pointed out product?

Rubber Bands (8): Apprentice




This product praises the above reviewed product.

Cowl: Apprentice S 15e RTF




Below is a fantastic product that many others have actually purchased the exact same time.

Fuselage: Apprentice S 15e RTF




Want an additional fantastic product to enhance the above pointed out product?

Tail Set: Apprentice S 15e RTF




This product is frequently bought with the above pointed out product.






Get this product to enhance the one you read about.



This is the E-Flite Tail Set for the Apprentice.

Features:

Decals are pre-applied

Includes:

Includes vertical fin & rudder
Horizontal stabilizer & elevator
Control horns
Tail screws

Below is an additional product that praises the product being reviewed.



These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Supplies a protected connection for battery and motor connections on
    R/C cars

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

Want an additional fantastic product to enhance the above pointed out product?

1Oz Z-Poxy 5 Min Syringe

This is Pacer's 5 Minute Epoxy & Hardener with the Syringe Applicator.

FEATURES:
Pacer epoxy adhesives treatment and join things together by a chemical
    reaction in between the resin and hardener. This reaction results in
    high strength bonds that are resistant to most chemicals.
Use for household, commercial, crafts, or any job that needs
    a high-strength, high-quality bond.
Best used on these products:
    -Metal & Wood
    -Concrete
    -Glass & China
    -Ceramics
Clear drying color.
Working time (time available to blend & use item & position
    repair): 5 minutes.
Handling time (the quantity of time repair must remain fixed for
    item to set): 15 minutes.
Full bond strength in one hour.
PSI strength: 1,500 pounds per square inch.
Water resistant.
It is not flammable.
Working temperature level range (as soon as totally treated it can withstand this
    temperature level range): -40°F to +176°F.
The special applicator includes a patent pending design that makes
    it easy to give and blend the correct amount of adhesive for any
    job. The snap off cap eliminates unsafe cutting of the tube ends
    while the snap out paddle in the manage makes it easy to blend.
    Nozzle design lets even the thickest products flow quickly.
    Reseals for storage.
Directions on package.

INCLUDES:
One Applicator with 5 Minute Epoxy and Hardener

SPECS:
Net Volume: 1oz (28.3g)

COMMENTS:
Not advised above 176°F (93°C). If temp is below 40°F, 5°C,
    (5°C), hardening time is considerably longer.

Many others have actually bought this product along with the product that you are presently reviewing.



This is the 20g bottle of Great Planes Pro Foam Safe Thin CA Glue.

FEATURES:
Perfect adhesive for final assembly on foam model airplane
Odorless and non-fuming and suitable with Pro CA Activator
    (GPMR6034 GPMR6035 GPMR6036)
Thin formula sets up quickest of all thicknesses
"Best if Utilized By..." date always insures freshness and best
efficiency

CONSISTS OF:
One 20g bottle of Great Planes Pro Foam Safe Thin
    CA (CyanoAcrylate) Glue

REQUIRES:
Applying to one side of item having to be joined and holding for
    10-15 seconds

COMMENTS:
"Best If Utilized By" date on bottom of bottle